u-boot-2016/doc
Alison Wang 0454e0c420 arm: vf610: Add Vybrid VF610 to mxc_ocotp document
This patch adds Vybrid VF610 to mxc_ocotp document.

Signed-off-by: Alison Wang <b18965@freescale.com>
Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-06-03 10:56:54 +02:00
..
device-tree-bindings
DocBook
driver-model arm: Remove support for unused s3c64xx 2013-04-12 07:55:08 +02:00
SPL
uImage.FIT
feature-removal-schedule.txt feature-removal-schedule.txt: Add CONFIG_SYS_MTEST_START/END 2013-04-19 15:09:02 -04:00
git-mailrc git-mailrc: Add trini shortcut 2013-04-29 17:01:58 -04:00
I2C_Edge_Conditions
kwboot.1
mkimage.1
README.440-DDR-performance
README.ag102
README.AMCC-eval-boards-cleanup
README.arm-caches
README.ARM-memory-map
README.arm-relocation nand: mxc: Switch NAND SPL to generic SPL 2013-04-12 07:55:07 +02:00
README.ARM-SoC
README.arm-unaligned-accesses
README.at91
README.at91-soc
README.atmel_mci
README.atmel_pmecc
README.autoboot
README.AVR32
README.AVR32-port-muxing
README.b4860qds
README.bedbug
README.bitbangMII
README.blackfin
README.bootmenu
README.bus_vcxk
README.cfi
README.commands
README.commands.itest
README.commands.spl
README.console
README.davinci
README.davinci.nand_spl
README.designware_eth
README.displaying-bmps
README.dns
README.drivers.eth
README.enetaddr
README.ext4
README.falcon
README.fdt-control sandbox: Add CONFIG_OF_HOSTFILE to read FDT from host file 2013-05-01 11:17:21 -04:00
README.fec_mxc
README.fsl-ddr
README.fsl-hwconfig
README.fsl_iim Add fsl_iim driver 2013-04-28 11:07:41 +02:00
README.fuse Add fuse API and commands 2013-04-28 11:07:40 +02:00
README.generic_usb_ohci
README.gpt
README.hwconfig
README.idma2intr
README.imx5 imx: Document fuse assignments for MAC addresses 2013-04-28 11:07:44 +02:00
README.imx6 imx: Document fuse assignments for MAC addresses 2013-04-28 11:07:44 +02:00
README.imx25 imx: Document fuse assignments for MAC addresses 2013-04-28 11:07:44 +02:00
README.imx27 imx: Document fuse assignments for MAC addresses 2013-04-28 11:07:44 +02:00
README.imx31
README.imximage tools: arm: imx: Implement BOOT_OFFSET command for imximage 2013-04-28 11:18:03 +02:00
README.iomux
README.JFFS2
README.JFFS2_NAND
README.kwbimage
README.LED
README.LED_display
README.link-local
README.lynxkdi
README.m28
README.m68k
README.m54418twr
README.marubun-pcmcia
README.memory-test
README.menu
README.mini2440
README.mips
README.Modem
README.mpc5xx
README.mpc74xx
README.mpc83xx.ddrecc
README.mpc83xxads
README.mpc85xx
README.mpc85xx-spin-table
README.mpc85xxads
README.mpc85xxcds
README.MPC866
README.mx28_common
README.mx28evk
README.mxc_ocotp arm: vf610: Add Vybrid VF610 to mxc_ocotp document 2013-06-03 10:56:54 +02:00
README.N1213
README.nand
README.nand-boot-ppc440
README.NDS32
README.ne2000
README.NetConsole
README.nokia_rx51
README.OFT
README.omap-reset-time ARM: OMAP5: Fix warm reset with USB cable connected 2013-05-10 08:25:55 -04:00
README.omap-ulpi-viewport
README.omap3 omap_gpmc: add support for hw assisted BCH8 2013-04-08 11:29:05 -04:00
README.p1010rdb powerpc/p1010rdb: add readme document for p1010rdb 2013-05-02 16:57:33 -05:00
README.pblimage
README.POST
README.ppc440
README.pxe
README.qemu-mips
README.ramboot-ppc85xx doc/ramboot.mpc85xx: Documented the RAMBOOT for MPC85xx 2013-05-02 16:56:45 -05:00
README.rmobile
README.s5pc1xx
README.sata
README.sched
README.scrapyard arm: Remove support for smdk6400 2013-04-12 07:55:08 +02:00
README.serial_multi
README.sh
README.sh7752evb
README.sha1
README.silent
README.SNTP
README.spear
README.SPL
README.srio-pcie-boot-corenet
README.standalone
README.switch_config
README.t4240qds
README.ubi
README.ublimage
README.update
README.usb
README.vf610 arm: vf610: Add Vybrid VF610 CPU support 2013-06-03 10:56:53 +02:00
README.video
README.VLAN
README.VSC3316-3308
README.watchdog watchdog: Add support for Xilinx Microblaze watchdog 2013-04-30 11:22:43 +02:00
README.zfs

This patch series adds support for ZFS listing and load to u-boot.

To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS

Steps to test:

1. After applying the patch, zfs specific commands can be seen
   in the boot loader prompt using
        UBOOT #help

        zfsload- load binary file from a ZFS file system
        zfsls  - list files in a directory (default /)

2. To list the files in zfs pool, device or partition, execute
        zfsls <interface> <dev[:part]> [POOL/@/dir/file]
        For example:
        UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/

3. To read and load a file from an ZFS formatted partition to RAM, execute
        zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
        For example:
        UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage

References :
	-- ZFS GRUB sources from Solaris GRUB-0.97
	-- GRUB Bazaar repository

Jorgen Lundman <lundman at lundman.net> 2012.