mirror of
https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016.git
synced 2026-02-07 04:20:43 +01:00
* 'master' of git://git.denx.de/u-boot-arm: (212 commits) ARM: cache: Move the cp15 CR register read before flushing the cache. ARM: introduce arch_early_init_r() PXA: Enable CONFIG_PREBOOT on zipitz2 ARM: mx28: Remove CONFIG_ARCH_CPU_INIT No need to define CONFIG_ARCH_CPU_INIT. add new board vl_ma2sc MTD: SPEAr SMI: Add write support for length < 4 bytes i2c: designware_i2c.c: Add support for the "i2c probe" command rtc/m41t62: Add support for M41T82 with HT (Halt Update) SPL: ARM: spear: Add SPL support for SPEAr600 platform Makefile: Add u-boot.spr build target (SPEAr) SPL: ARM: spear: Remove some objects from SPL build SPL: lib/Makefile: Add crc32.c to SPL build SPL: common/Makefile: Add image.c to SPL build arm: Don't use printf() in SPL builds GPIO: Add SPEAr GPIO driver net: Multiple updates/enhancements to designware.c cleanup/SPEAr: Define configuration flags more elegantly cleanup/SPEAr: Remove unnecessary parenthesis SPEAr: Correct SoC ID offset in misc configuration space SPEAr: explicitly select clk src for UART SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION SPEAr: Enable dcache for fast file transfer SPEAr: Enable autoneg for ethernet SPEAr: Enable udc and usb-console support only for usbtty configuration SPEAr: Enable usb device high speed support SPEAr: Initialize SNOR in early_board_init_f SPEAr: Change the default environment variables SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK) SPEAr: Add configuration options for spear3xx and spear6xx boards SPEAr: Add basic arch related support for SPEAr SoCs SPEAr: Add interface information in initialization SPEAr: Add macb driver support for spear310 and spear320 SPEAr: Configure network support for spear SoCs SPEAr: Place ethaddr write and read within CONFIG_CMD_NET SPEAr: Eliminate dependency on Xloader table SPEAr: Fix ARM relocation support st_smi: Fixed page size for Winbond W25Q128FV flash st_smi: Change timeout loop implementation st_smi: Fix bug in flash_print_info() st_smi: Change the flash probing method st_smi: Removed no needed dependency on ST_M25Pxx_ID st_smi: Fix smi read status st_smi: Move status register read before modifying ctrl register st_smi: Read status until timeout happens st_smi: Enhance the error handling st_smi: Change SMI timeout values st_smi: Return error in case TFF is not set st_smi: Add support for SPEAr SMI driver mtd/NAND: Remove obsolete SPEAr specific NAND drivers SPEAr: Configure FSMC driver for NAND interface mtd/NAND: Add FSMC driver support arm/km: remove calls to kw_gpio_* in board_early_init_f arm/km: add implementation for read_dip_switch arm/km: support the 2 PCIe fpga resets arm/km: skip FPGA config when already configured arm/km: redefine piggy 4 reg names to avoid conflicts arm/km: cleanup km_kirkwood boards arm/km: enable BOCO2 FPGA download support arm/km: remove portl2.h and use km_kirkwood instead arm/km: convert mgcoge3un target to km_kirkwood arm/km: add kmcoge5un board support arm/km: add kmnusa board support arm: bugfix: save_boot_params_default accesses uninitalized stack when -O0 cm-t35: fix incorrect NAND_ECC layout selection ARM: OMAP4/5: Do not configure non essential pads, clocks, dplls. ARM: OMAP4/5: Move USB pads to essential list. ARM: OMAP4/5: Move USB clocks to essential group. ARM: OMAP4/5: Move gpmc clocks to essential group. ARM: OMAP4+: Move external phy initialisations to arch specific place. omap4: Use a smaller M,N couple for IVA DPLL da850/omap-l138: Enable auto negotiation in RMII mode omap: am33xx: accomodate input clocks other than 24 Mhz omap: emif: fix bug in manufacturer code test omap: emif: deal with rams that return duplicate mr data on all byte lanes OMAP4+: Force DDR in self-refresh after warm reset OMAP4+: Handle sdram init after warm reset ARM: OMAP3+: Detect reset type arm: bugfix: Move vector table before jumping relocated code Kirkwood: Add support for Ka-Ro TK71 arm/km: use spi claim bus to switch between SPI and NAND arm/kirkwood: protect the ENV_SPI #defines ARM: don't probe PHY address for LaCie boards lacie_kw: fix CONFIG_SYS_KWD_CONFIG for inetspace_v2 lacie_kw: fix SDRAM banks number for net2big_v2 Kirkwood: add lschlv2 and lsxhl board support net: add helper to generate random mac address net: use common rand()/srand() functions lib: add rand() function kwboot: boot kirkwood SoCs over a serial link kw_spi: add weak functions board_spi_claim/release_bus kw_spi: support spi_claim/release_bus functions kw_spi: backup and reset the MPP of the chosen CS pin kirkwood: fix calls to kirkwood_mpp_conf kirkwood: add save functionality kirkwood_mpp_conf function km_arm: use filesize for erase in update command arm/km: enable mii cmd arm/km: remove CONFIG_RESET_PHY_R arm/km: change maintainer for mgcoge3un arm/km: fix wrong comment in SDRAM config for mgcoge3un arm/km: use ARRAY_SIZE macro arm/km: rename CONFIG option CONFIG_KM_DEF_ENV_UPDATE arm/km: add piggy mac adress offset for mgcoge3un arm/km: add board type to boards.cfg AT91SAM9*: Change kernel address in dataflash to match u-boot's size ATMEL/PIO: Enable new feature of PIO on Atmel device ehci-atmel: fix compiler warning AT91: at91sam9m10g45ek : Enable EHCI instead OHCI Atmel : usb : add EHCI driver for Atmel SoC Fix: AT91SAM9263 nor flash usage Fix: broken boot message at serial line on AT91SAM9263-EK board i.MX6 USDHC: Use the ESDHC clock mx28evk: Fix boot by adjusting HW_DRAM_CTL29 register i.MX28: Add function to adjust memory parameters mx28evk: Fix PSWITCH key position mx53smd: Remove CONFIG_SYS_I2C_SLAVE definition mx53loco: Remove CONFIG_SYS_I2C_SLAVE definition mx53evk: Remove CONFIG_SYS_I2C_SLAVE definition mx53ard: Remove CONFIG_SYS_I2C_SLAVE definition mx35pdk: Remove CONFIG_SYS_I2C_SLAVE definition imx31_phycore: Remove CONFIG_SYS_I2C_SLAVE definition mx53ard: Remove unused CONFIG_MII_GASKET mx6: Avoid writing to read-only bits in imximage.cfg m28evk: use same notation to alloc the 128kB stack ... Signed-off-by: Wolfgang Denk <wd@denx.de> |
||
|---|---|---|
| .. | ||
| andestech | ||
| asm-generic | ||
| bedbug | ||
| configs | ||
| cramfs | ||
| faraday | ||
| galileo | ||
| jffs2 | ||
| linux | ||
| lzma | ||
| mtd | ||
| pcmcia | ||
| synopsys | ||
| u-boot | ||
| usb | ||
| .gitignore | ||
| 74xx_7xx.h | ||
| _exports.h | ||
| ACEX1K.h | ||
| addr_map.h | ||
| aes.h | ||
| ahci.h | ||
| ali512x.h | ||
| altera.h | ||
| amba_clcd.h | ||
| ambapp.h | ||
| api_public.h | ||
| arm925t.h | ||
| armcoremodule.h | ||
| asm-offsets.h | ||
| at45.h | ||
| at91rm9200_i2c.h | ||
| at91rm9200_net.h | ||
| ata.h | ||
| atmel_hlcdc.h | ||
| atmel_lcdc.h | ||
| atmel_mci.h | ||
| bcd.h | ||
| bcm5221.h | ||
| bmp_layout.h | ||
| bootstage.h | ||
| bus_vcxk.h | ||
| bzlib.h | ||
| circbuf.h | ||
| clps7111.h | ||
| cmd_spl.h | ||
| command.h | ||
| common.h | ||
| commproc.h | ||
| compiler.h | ||
| config_cmd_all.h | ||
| config_cmd_default.h | ||
| config_cmd_defaults.h | ||
| config_defaults.h | ||
| config_fallbacks.h | ||
| config_phylib_all_drivers.h | ||
| crc.h | ||
| da9030.h | ||
| dataflash.h | ||
| ddr_spd.h | ||
| dialog_pmic.h | ||
| div64.h | ||
| dm9000.h | ||
| dm9161.h | ||
| dp83848.h | ||
| ds1722.h | ||
| ds4510.h | ||
| dtt.h | ||
| e500.h | ||
| elf.h | ||
| environment.h | ||
| errno.h | ||
| exports.h | ||
| ext2fs.h | ||
| fat.h | ||
| fdc.h | ||
| fdt.h | ||
| fdt_support.h | ||
| fdtdec.h | ||
| fis.h | ||
| flash.h | ||
| fm_eth.h | ||
| fpga.h | ||
| fsl_diu_fb.h | ||
| fsl_esdhc.h | ||
| fsl_mdio.h | ||
| fsl_nfc.h | ||
| fsl_pmic.h | ||
| gdsys_fpga.h | ||
| hush.h | ||
| hwconfig.h | ||
| i2c.h | ||
| i8042.h | ||
| ide.h | ||
| image.h | ||
| input.h | ||
| iomux.h | ||
| ioports.h | ||
| ipu_pixfmt.h | ||
| key_matrix.h | ||
| keyboard.h | ||
| kgdb.h | ||
| ks8721.h | ||
| lattice.h | ||
| lcd.h | ||
| lcdvideo.h | ||
| led-display.h | ||
| lh7a40x.h | ||
| lh7a400.h | ||
| lh7a404.h | ||
| libata.h | ||
| libfdt.h | ||
| libfdt_env.h | ||
| libtizen.h | ||
| linux_logo.h | ||
| lmb.h | ||
| logbuff.h | ||
| lpd7a400_cpld.h | ||
| lxt971a.h | ||
| lynxkdi.h | ||
| malloc.h | ||
| max8997_pmic.h | ||
| max8998_pmic.h | ||
| mb862xx.h | ||
| mc9sdz60.h | ||
| mc13783.h | ||
| mc13892.h | ||
| MCD_dma.h | ||
| MCD_progCheck.h | ||
| MCD_tasksInit.h | ||
| menu.h | ||
| micrel.h | ||
| mii_phy.h | ||
| miiphy.h | ||
| mk48t59.h | ||
| mmc.h | ||
| mpc5xx.h | ||
| mpc5xxx.h | ||
| mpc5xxx_sdma.h | ||
| mpc8xx.h | ||
| mpc8xx_irq.h | ||
| mpc83xx.h | ||
| mpc85xx.h | ||
| mpc86xx.h | ||
| mpc106.h | ||
| mpc824x.h | ||
| mpc8220.h | ||
| mpc8260.h | ||
| mpc8260_irq.h | ||
| mtd_node.h | ||
| mvmfp.h | ||
| nand.h | ||
| net.h | ||
| netdev.h | ||
| nios2-epcs.h | ||
| nios2-io.h | ||
| nios2-yanu.h | ||
| nios2.h | ||
| nomadik.h | ||
| ns9750_bbus.h | ||
| ns9750_mem.h | ||
| ns9750_ser.h | ||
| ns9750_sys.h | ||
| ns16550.h | ||
| ns87308.h | ||
| onenand_uboot.h | ||
| os.h | ||
| part.h | ||
| pc_keyb.h | ||
| pca953x.h | ||
| pca9564.h | ||
| pca9698.h | ||
| pci.h | ||
| pci_ids.h | ||
| pcmcia.h | ||
| phy.h | ||
| pmic.h | ||
| post.h | ||
| ppc_asm.tmpl | ||
| ppc_defs.h | ||
| ps2mult.h | ||
| pwm.h | ||
| radeon.h | ||
| reiserfs.h | ||
| rtc.h | ||
| s6e63d6.h | ||
| s_record.h | ||
| SA-1100.h | ||
| sata.h | ||
| scsi.h | ||
| sdhci.h | ||
| search.h | ||
| sed156x.h | ||
| sed13806.h | ||
| serial.h | ||
| sha1.h | ||
| sha256.h | ||
| sja1000.h | ||
| sm501.h | ||
| smiLynxEM.h | ||
| spartan2.h | ||
| spartan3.h | ||
| spd.h | ||
| spd_sdram.h | ||
| spi.h | ||
| spi_flash.h | ||
| status_led.h | ||
| stdio_dev.h | ||
| stratixII.h | ||
| sym53c8xx.h | ||
| systemace.h | ||
| tegra-kbc.h | ||
| timestamp.h | ||
| tpm.h | ||
| tps6586x.h | ||
| tsec.h | ||
| tsi108.h | ||
| tsi148.h | ||
| twl4030.h | ||
| twl6030.h | ||
| twl6035.h | ||
| tws.h | ||
| ubi_uboot.h | ||
| universe.h | ||
| usb.h | ||
| usb_cdc_acm.h | ||
| usb_defs.h | ||
| usb_ether.h | ||
| usbdescriptors.h | ||
| usbdevice.h | ||
| version.h | ||
| video.h | ||
| video_ad7176.h | ||
| video_ad7177.h | ||
| video_ad7179.h | ||
| video_easylogo.h | ||
| video_fb.h | ||
| video_font.h | ||
| video_font_data.h | ||
| video_logo.h | ||
| virtex2.h | ||
| vsc7385.h | ||
| vsprintf.h | ||
| vxworks.h | ||
| w83c553f.h | ||
| watchdog.h | ||
| xilinx.h | ||
| xyzModem.h | ||