Simon Kagstrom 8003c361de arm926ejs: 8-byte align stack to avoid LDRD/STRD problems ... U-boot for Marvell Kirkwood boards no longer work after the EABI changes introduced in commit f772acf8a5. This turns out to be caused by a stack alignment issue. The armv5te instructions ldrd/strd instructions require 8-byte alignment to work properly (otherwise undefined behavior). Tested on an OpenRD base board, where both printouts and ubifs stuff now works. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>		2009-10-24 09:55:25 -05:00
..
at91	Add support for Eukrea CPU9260/CPU9G20 SBC	2009-10-13 06:17:35 -05:00
davinci	TI DaVinci: DM646x: Initial Support for DM646x SOC	2009-10-13 06:17:34 -05:00
kirkwood	arm: Correct build with CONFIG_SYS_HUSH_PARSER set	2009-10-13 06:17:38 -05:00
mx27	imx27lite: add support for imx27lite board from LogicPD	2009-09-01 22:10:55 +02:00
nomadik	arm nomadik: add gpio support	2009-07-29 09:57:46 +02:00
omap	arm920/926/926: remove non needed header	2009-06-12 20:39:49 +02:00
versatile	arm920/926/926: remove non needed header	2009-06-12 20:39:49 +02:00
config.mk	arm: Remove -fno-strict-aliasing	2009-09-04 22:15:53 +02:00
cpu.c	arm: remove cpu_init	2009-06-12 20:39:52 +02:00
Makefile	arm: timer and interrupt init rework	2009-06-12 20:39:48 +02:00
start.S	arm926ejs: 8-byte align stack to avoid LDRD/STRD problems	2009-10-24 09:55:25 -05:00
u-boot.lds	arm: unify linker script	2009-06-12 20:39:52 +02:00