Ilya Yanok b86b85e261 mmc: set bus width to 1 and clock to minimum early during initialization ... We need to switch back to 1-bit before initialization or SD 2.0 cards will fail to send SCR if we've switched to 4-bit already. Signed-off-by: Ilya Yanok <yanok@emcraft.com>		2009-07-19 22:07:29 +02:00
..
atmel_mci.c	Convert mmc_init to mmc_legacy_init	2009-02-16 18:07:40 -06:00
atmel_mci.h	mmc: Move atmel_mci driver into drivers/mmc	2008-07-10 00:05:52 +02:00
bfin_sdh.c	Blackfin: convert bfin_sdh to legacy mmc	2009-04-02 06:42:05 -04:00
bfin_sdh.h	Blackfin: add driver for on-chip MMC/SD controller	2009-02-02 12:27:18 -05:00
fsl_esdhc.c	fsl_esdhc: Add device tree fixups	2009-07-16 22:24:06 +02:00
Makefile	pxa: move mmc drivers to drivers/mmc	2009-02-20 03:47:50 +01:00
mmc.c	mmc: set bus width to 1 and clock to minimum early during initialization	2009-07-19 22:07:29 +02:00
omap3_mmc.c	OMAP3: Clean up MMC code	2009-02-22 18:29:10 +01:00
pxa_mmc.c	ARM:PXA Use new definitions in mmc.h	2009-02-20 03:47:50 +01:00
pxa_mmc.h	pxa: move mmc drivers to drivers/mmc	2009-02-20 03:47:50 +01:00