Heiko Schocher 39df00d9ae i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c ... This patch adds the possibility to call a board specific i2c bus reset routine for the fsl_i2c bus driver, and adds this option for the keymile kmeter1 board. The deblock sequence for this board is implemented and tested in the following way: CR = 0x20 (release SDA and SCL pin) CR = 0xa0 (start read) dummy read dummy read if 2. dummy read == 0x00 3. dummy read CR = 0x80 (SDA and SCL now 1 SR = 0x86) CR = 0x00 (Modul reset SR=0x81) CR = 0x80 (SDA and SCL = 1, SR = 0x81) Signed-off-by: Heiko Schocher <hs@denx.de>		2009-07-21 07:06:26 +02:00
..
bfin-twi_i2c.c	Blackfin: TWI/I2C: fix pure writes	2009-06-30 08:27:45 +02:00
davinci_i2c.c	davinci: move i2c driver to drivers/i2c	2009-03-30 18:58:39 +02:00
fsl_i2c.c	i2c, mpc83xx: add CONFIG_SYS_I2C_INIT_BOARD for fsl_i2c	2009-07-21 07:06:26 +02:00
Makefile	s3c24x0: move i2c driver to drivers/i2c	2009-03-30 18:58:40 +02:00
mxc_i2c.c	i.MX31: Start the I2C clock on driver initialisation	2009-02-14 10:00:51 +01:00
omap24xx_i2c.c	OMAP3: Add I2C support	2009-01-24 17:51:22 +01:00
omap1510_i2c.c	Cleanup: fix "MHz" spelling	2008-10-21 11:25:39 +02:00
s3c24x0_i2c.c	s3c24x0: move i2c driver to drivers/i2c	2009-03-30 18:58:40 +02:00
s3c44b0_i2c.c	s3c44b0: move i2c driver to drivers/i2c	2009-03-29 23:01:40 +02:00
soft_i2c.c	i2c: Create common default i2c_[set|get]_bus_speed() functions	2009-06-12 20:39:45 +02:00
tsi108_i2c.c	i2c: Update references to individual i2c commands	2009-06-12 20:39:46 +02:00