Stefan Roese c440bfe6d6 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board ... This patch adds NAND booting support for the AMCC Acadia eval board. Please make sure to configure jumper J7 to position 2-3 when booting from NOR, and to position 1-2 when booting for NAND. I also added a board command to configure the I2C bootstrap EEPROM values. Right now only 267MHz is support for booting either via NOR or NAND FLASH. Here the usage: => bootstrap 267 nor ;to configure the board for 267MHz NOR booting => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting Signed-off-by: Stefan Roese <sr@denx.de>		2007-06-06 11:42:13 +02:00
..
acadia	ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board	2007-06-06 11:42:13 +02:00
bamboo	ppc4xx: Add missing file for Bamboo NAND booting support	2007-06-01 16:18:17 +02:00
bubinga	Move "ar" flags to config.mk to allow for silent "make -s"	2006-10-09 01:02:05 +02:00
common	Code cleanup	2006-08-27 18:10:01 +02:00
ebony	[PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board	2007-03-16 21:11:42 +01:00
katmai	ppc4xx: Change SysACE address on Katmai	2007-04-02 10:09:30 +02:00
luan	[PATCH] Update AMCC Luan 440SP eval board support	2007-03-08 10:13:16 +01:00
ocotea	[PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board	2007-03-07 16:43:00 +01:00
sequoia	Merge with /home/stefan/git/u-boot/bamboo-nand	2007-06-01 16:15:34 +02:00
taishan	Minor code cleanup.	2007-01-19 23:08:39 +01:00
walnut	Move "ar" flags to config.mk to allow for silent "make -s"	2006-10-09 01:02:05 +02:00
yosemite	[PATCH] Merge Yosemite & Yellowstone board ports	2007-01-30 17:04:19 +01:00
yucca	[PATCH] Update AMCC Yucca 440SPe eval board support	2007-03-08 10:10:18 +01:00