Suresh Gupta e2544e7a54 B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig ... In B4860QDS board SerDes2 lanes EFGH either go to SFP or AMC riser card slot2 so either DTSEC3/DTSEC4 or TGEC1/TGEC2 should be accessible. This Patch enables DTSEC3/DTSEC4 or TGEC1/TGEC2 on bases of user specified string fsl_b4860_serdes2:sfp_amc=amc or fsl_b4860_serdes2:sfp_amc=sfp respectively in hwconfig. Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>		2014-12-05 08:06:14 -08:00
..
b4_pbi.cfg	board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config	2014-04-22 17:58:47 -07:00
b4_rcw.cfg	powerpc/b4860/pbl: fix rcw cfg	2014-01-02 14:10:14 -08:00
b4860qds.c	powerpc/b4860qds: add workaround for XFI	2014-12-05 08:06:13 -08:00
b4860qds.h	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
b4860qds_crossbar_con.h	board/b4860qds: Add support to make Aurora work on B4860QDS	2014-03-07 14:49:16 -08:00
b4860qds_qixis.h	SGMII:fix PHY addresses for QSGMII Riser Card working in SGMII mode	2013-10-16 16:13:11 -07:00
ddr.c	board/b4qds:Add support of 2 stage NAND boot-loader	2014-04-22 17:58:51 -07:00
eth_b4860qds.c	B4860QDS: Enable enet port as per fsl_b4860_serdes2 string in hwconfig	2014-12-05 08:06:14 -08:00
Kconfig	kconfig: remove redundant "string" type in arch and board Kconfigs	2014-09-13 16:43:55 -04:00
law.c	powerpc/b4860: Enable law creation of MAPLE	2014-12-05 08:06:12 -08:00
MAINTAINERS	MAINTAINERS: comment out blank M: field	2014-09-24 18:30:28 -04:00
Makefile	board/b4qds:Add support of 2 stage NAND boot-loader	2014-04-22 17:58:51 -07:00
pci.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
spl.c	board/b4qds:Add support of 2 stage NAND boot-loader	2014-04-22 17:58:51 -07:00
tlb.c	board/b4qds:Add support of 2 stage NAND boot-loader	2014-04-22 17:58:51 -07:00