Wolfgang Grandegger 33846df28f Add wait flags to support board/chip specific delays ... The NAND flash on the TQM8548_BE modules requires a short delay after running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE requires a further short delay after writing out a buffer. Normally the R/B pin should be checked, but it's not connected on the TQM8548_BE. The corresponding Linux FSL UPM driver uses similar delay points at the same locations. To manage these extra delays in a more general way, I introduced the "wait_flags" field allowing the board-specific driver to specify various types of extra delay. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Scott Wood <scottwood@freescale.com>		2009-03-23 15:53:40 -05:00
..
nand	Add wait flags to support board/chip specific delays	2009-03-23 15:53:40 -05:00
nand_legacy	NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS	2009-01-23 10:32:51 -06:00
onenand	OneNAND: Additional sync with 2.6.27	2009-01-23 10:32:48 -06:00
spi	spi flash: fix crash due to spi flash miscommunication	2009-01-24 01:57:40 +01:00
ubi	Coding style cleanup, update CHANGELOG.	2008-12-16 01:02:17 +01:00
at45.c	drivers/mtd: Move conditional compilation to Makefile	2008-08-13 01:40:42 +02:00
cfi_flash.c	Make flash protection work, when the environment is in EEPROM	2009-03-23 09:50:45 +01:00
cfi_mtd.c	cfi-mtd: Add cfi-mtd driver.	2008-11-24 11:05:25 +01:00
dataflash.c	mtd/dataflash.c: fix a problem with the last partition	2008-12-02 21:53:24 +01:00
jedec_flash.c	jedec_flash: Only use manufacturer defines from common flash.h	2009-02-05 11:27:58 +01:00
Makefile	Merge branch 'master' of git://git.denx.de/u-boot-ubi	2008-11-25 11:40:57 +01:00
mtdcore.c	mtd: Remove a printf() from add_mtd_device().	2008-11-24 11:29:53 +01:00
mtdpart.c	MTD: Fix problem based on non-working relocation (list head mtd_partitions)	2008-12-09 10:07:23 +01:00
mw_eeprom.c	Update i386 code (sc520_cdp)	2008-09-09 11:48:53 +02:00