u-boot-2016/cpu
Daniel Gorsulowski 45627fce18 at91: Add CAN init function
To enable CAN init, CONFIG_CAN has to be defined in the board config file
and at91_can_hw_init() has to be called in the board specific code.

CAN is available on AT91SAM9263 and AT91CAP9 SoC.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2009-07-06 21:52:43 +02:00
..
74xx_7xx 74xx_7xx: Fix rounding problem in CPU frequency calculation 2009-05-15 22:22:01 +02:00
arm720t arm: remove cpu_init 2009-06-12 20:39:52 +02:00
arm920t S3C24x0: extract interrupts from timer 2009-07-06 21:52:35 +02:00
arm925t arm: remove cpu_init 2009-06-12 20:39:52 +02:00
arm926ejs at91: Add CAN init function 2009-07-06 21:52:43 +02:00
arm946es arm: remove cpu_init 2009-06-12 20:39:52 +02:00
arm1136 i.MX31: Create a common device file. 2009-06-21 16:18:13 +02:00
arm1176 s3c64xx: move the reset_cpu function 2009-06-26 00:02:35 +02:00
arm_cortexa8 move L2 cache enable/disable function to cache.c in the omap3 SoC directory 2009-07-06 21:52:25 +02:00
arm_intcm arm: remove cpu_init 2009-06-12 20:39:52 +02:00
at32ap
blackfin Blackfin: bump up default JTAG console timeout 2009-06-15 13:30:08 -04:00
i386 Add basic relocation to i386 port 2009-03-20 22:39:13 +01:00
ixp arm: remove cpu_init 2009-06-12 20:39:52 +02:00
leon2
leon3
lh7a40x lh7a40x: move serial driver to drivers/serial 2009-06-12 20:39:53 +02:00
mcf52x2
mcf523x
mcf532x
mcf547x_8x
mcf5227x
mcf5445x
microblaze
mips MIPS: Implement ethernet halt for au1x00 2009-05-16 09:20:03 +09:00
mpc5xx
mpc5xxx Fix e-mail address of Gary Jennejohn. 2009-05-15 22:11:59 +02:00
mpc8xx
mpc8xxx/ddr fsl-ddr: Fix handling of >4G of memory when !CONFIG_PHYS_64BIT 2009-06-12 09:15:50 -05:00
mpc83xx qe: Pass in uec_info struct through uec_initialize 2009-06-12 17:17:02 -05:00
mpc85xx fsl/85xx, 86xx: Sync up DMA code 2009-06-12 17:17:58 -05:00
mpc86xx fsl/85xx, 86xx: Sync up DMA code 2009-06-12 17:17:58 -05:00
mpc512x mpc512x: Fix problem with I2C access before relocation 2009-06-12 20:47:18 +02:00
mpc824x
mpc8220
mpc8260 i2c: Create common default i2c_[set|get]_bus_speed() functions 2009-06-12 20:39:45 +02:00
nios General help message cleanup 2009-06-12 20:47:16 +02:00
nios2 General help message cleanup 2009-06-12 20:47:16 +02:00
ppc4xx ppc4xx: Remove PCI async bootup message if PCI is not used 2009-06-12 20:39:52 +02:00
pxa pxa: move serial driver to drivers/serial 2009-06-12 20:39:52 +02:00
s3c44b0 arm: remove cpu_init 2009-06-12 20:39:52 +02:00
sa1100 arm: remove cpu_init 2009-06-12 20:39:52 +02:00
sh2
sh3
sh4