Daniel Gorsulowski 45627fce18 at91: Add CAN init function ... To enable CAN init, CONFIG_CAN has to be defined in the board config file and at91_can_hw_init() has to be called in the board specific code. CAN is available on AT91SAM9263 and AT91CAP9 SoC. Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>		2009-07-06 21:52:43 +02:00
..
at91	at91: Add CAN init function	2009-07-06 21:52:43 +02:00
davinci	Switched davinci_emac Ethernet driver to use newer API	2009-06-15 00:13:54 -07:00
kirkwood	arm: Kirkwood: Basic SOCs support	2009-07-06 21:52:17 +02:00
mx27	mx27: basic cpu support	2009-06-21 16:18:13 +02:00
nomadik	arm920/926/926: remove non needed header	2009-06-12 20:39:49 +02:00
omap	arm920/926/926: remove non needed header	2009-06-12 20:39:49 +02:00
versatile	arm920/926/926: remove non needed header	2009-06-12 20:39:49 +02:00
config.mk	Fix e-mail address of Gary Jennejohn.	2009-05-15 22:11:59 +02:00
cpu.c	arm: remove cpu_init	2009-06-12 20:39:52 +02:00
Makefile	arm: timer and interrupt init rework	2009-06-12 20:39:48 +02:00
start.S	Fix e-mail address of Gary Jennejohn.	2009-05-15 22:11:59 +02:00
u-boot.lds	arm: unify linker script	2009-06-12 20:39:52 +02:00