Enable compressed ART support and also
included related header files.
Change-Id: Ie28a0e5a91548b8b4ae9ae0560b7d139812145b3
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
This change adds MI01.2-C2 (RDP484) which is a derivative of RDP441
with PON SFP connected and ethernet SFP plugged out.
Change-Id: I2075b3a4f09e510bbc5f188209435b97b06e5ba7
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Changing RDP467 to AL02-C20.
Also updating the return machid type
for AL02-C11 similar to AL02-C12,
since AL02-C11 is converted to RDP455
configuration.
Change-Id: I87e3b954d1ea9f38b24504f5b5754f9fef38df83
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
This change renames all the affect files from rdp479/rdp481 to
mi01.12/mi01.14 respectively
Change-Id: Ia06a17b9c34bf7e49fe43721db1e83bd4f5a7e3e
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
For tiny profiles, ART partition is compressed.
Indicate the same to the Linux kernel with an fdt entry.
Change-Id: I9c3a21fc2c8350487fc100dedc79480fec5d462f
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
This new config CONFIG_REDUCE_FOOTPRINT is
added for non-standard code reduction to
address tiny-nor size requirements.
Change-Id: I0ed9df935e8f16bc83bd937432ecf0f892f88caf
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
For mi04.1-c2, add a fallback entry config@1 for
single dts FIT image.
Change-Id: I4f589fd3c8c5ddff28fdebeef81f76bb577a5a5c
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Since only Q6/TME/TZ should have access to memnoc clock,
so removing the MEMNOC clock enable sequence.
Change-Id: Iee32a59c340cda794b8ee3c314be871ab749ff79
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
This patch appends the rdp477 name of ap-mi01.3-c2 and
rdp 478 name of ap-mi04.1-c2 in config
Change-Id: Ie1f864d518b5c97cc35d42cc8f1eba45e05a9280
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
RDP467 is same as AL02-C4 with PCIE0 enabled with
wkk support.
Change-Id: If6ba645b7c62a3320139a7c86e0b89ec525a0fb7
Signed-off-by: Saahil Tomar <quic_saahtoma@quicinc.com>
Signed-off-by: Hariharan K <quic_harihk@quicinc.com>
This changes fixup "qcom,controlled-remotely" property and
"qti,config-pipe-trust-reg" property in the crypto bam node
in ATF boot. This will enable the kernel to do complete bam
pipe initialization.
Change-Id: I454c4e4e68354506dc16b1e72b514264778314e0
Signed-off-by: Karthick Shanmugham <quic_kartshan@quicinc.com>
This patch adds the XCFG configuration for improving the
performance in the USB compliance test
Adjust HSTX slew rate from 565 ps to 400 ps
Adjust Manual control ODT value from 45.02 Ohm to 33.97 ohm
Adjust HSTX Current of current-mode driver, 17.1mA * 22.5ohm = 385mV
Change-Id: I21a6fc9ff520c36d5cbc4d727e48309d556c8165
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
The previous fixup patch will not actually fdt fixup all the
mentioned config name, it will pick the first one only. So
that, 6.1 kernel will not boot up.
So, updating the config name fixup logic for the multiple
config names.
Change-Id: I4197c04c1edcd72e0982ccbf6884617c998880de
Signed-off-by: Ram Kumar D <quic_ramd@quicinc.com>
Add support to read the TME-l OEM fuse parameters from
qfprom address
Change-Id: Ia4f0766a68b67fccc59a09883dd7ef11bc970eef
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
if board has emmc flash type,
Ehable EMMC and disable NAND flash in
kernel device tree during kernel bootup
Change-Id: Ibbe197c39c4c4e47d97c33fa9a48d068e85917ab
Signed-off-by: Gurumoorthy Santhakumar <quic_gsanthak@quicinc.com>
The pcie0 and usb uses combo phy, for usb 3.0 GCC_PCIE3X1_PHY_AHB_CBCR
clock has to be enabled
Change-Id: I281773f40bf7d32b27a27e7dc5e5d531ae3a3dc0
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch increases the CDR bandwidth to pass the
USB 3.0 Rx jitter tolerance test
Change-Id: Id58b71f4078ea5d60ab0b0d7bf93aa0a5d519e3c
Signed-off-by: Timple Raj M <quic_timple@quicinc.com>
This patch adds a condition to power cycle the
SDX based on the current status of the e911 call.
Change-Id: Id3cf50cfb49a26151c98b7d52e18b9c487cfb935
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
This patch removes the support for dumpinfo_s structure to have
uniform EBICS0 bin for both sec and non-sec boots as the Read As Zero
(RAZ) flag has been enabled to protect code and data regions of TZ
Change-Id: I0508677f7dbc4040660d7dd122d7a5d79554ce60
Signed-off-by: quic_abilj <quic_abilj@quicinc.com>
