Added dts and initial board support for ipq806x.
Change-Id: I33992413905a0399ea3d6dfbd606c8e7ec30b6bf
Signed-off-by: Aditya Kumar Patra S <apatr@codeaurora.org>
Set mtdids environment variable based on the boot flash so that right
set of mtdids is patched to kernel device tree.
Change-Id: If2f063e51a6bb73f3e8197fb133e0399b0b4df18
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
The clock routines specific to ipq807x will
live in clock.c.
Change-Id: I4bb0b5a28ff95d08fab7913ca89ffbe1882ba72f
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Diagnostics support includes read, write and probe
commands.
Change-Id: I899be70b69c5965e72ae413b913e4f837ffc9f40
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Sets qpic-nand base address by reading from device tree using the
compatible string
Change-Id: I6e23ea579d9472fc9c977f9b549c312d61e9402b
Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
Moved to DM approach to make it more flexible to support
AK/DK/HK chipset.
Change-Id: I0fded02c97b7ace500df44bbf39285ef6fb58321
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
This would allow us to define architecture specific base address
in the respective config files.
Change-Id: Ide1573525cfe09d8db51d397ee55b907b256f47e
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
Step 1 to make this file generic to support AK/DK/DK.
Change-Id: Ie058337135b73510d29a3e563c1c341aa6b1fd8e
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
Fixed warnings for both ipq807x and ipq40xx
builds.
Change-Id: I69accebf525ee52f470335a14474378f5e7f65b0
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
Basic USB enumuration support has been added.
Only storage devices are identified. Hubs are not supported.
Change-Id: Ia6532d7cec4e531270fc403381a1d690a9e455f0
Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
Signed-off-by: Saravanan Jaganathan <sjaganat@codeaurora.org>
check the image header, if the magic signature matches then
perform and indirect jump to 64 bit EL1 through TZ.
Change-Id: I92888faa7ed908652671bf09a4f6d4599340db5b
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
SMC calls are common for IPQ807x, IPQ40xx hence moving it to
common folder
Change-Id: I3d6564ad51ebe396f85cedbf41374374f40865c6
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
dtbs are made as .o
a table specifying their machid and address is added
the dtbs and header are added to u-boot image in a seperate section
dtb will be chosen based on machid detected from SMEM
Change-Id: I50ac5b56da3a431c1a75cb9fc113fafaedbc09b8
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
The SMEM is used for all the platforms like ipq40xx and ipq807x.
So moving this into a common place to use all qcom platforms.
Change-Id: I04f0bf0e7aad0eae71024d734d8049a3470d510d
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
u-boot and dtb are seperate images. This patch combines them as
single ELF image.
Change-Id: Ib3c72c26844ffd4fd8489d0595c243a15434802e
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
serial clock rate is now fixed.
GCNT timer needs to be initialized.
Change-Id: Ia66ff458a4c66cfb6cf9fa5fd4953498ef3b656d
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
DDR base address is now fixed to be at 0x40000000 and this patch
changes u-boot load address in accordance with that.
Change-Id: I13d0da43a7b0db0e6e322e3828e42da46ebd53cb
Signed-off-by: Manoharan Vijaya Raghavan <mraghava@codeaurora.org>
