diff --git a/board/qca/arm/ipq5332/ipq5332.c b/board/qca/arm/ipq5332/ipq5332.c
index a994aeab75..dc95707f6e 100644
--- a/board/qca/arm/ipq5332/ipq5332.c
+++ b/board/qca/arm/ipq5332/ipq5332.c
@@ -137,48 +137,6 @@ void fdt_fixup_flash(void *blob)
 	return;
 }
 
-void ipq_uboot_fdt_fixup(void)
-{
-	int node, ret = 0;
-	char *flash;
-	void *blob = (void *)gd->fdt_blob;
-	ulong machid = gd->bd->bi_arch_number;
-
-	if (machid == MACH_TYPE_IPQ5332_EMULATION)
-		return;
-
-	/* fix peripherals required for basic board bring up
-	 * like flash etc.
-	 */
-	/* This becomes obsolete as nand or emmc will be
-	 * initialized based on the boot type. Below code
-	 * will be removed later
-	 */
-
-	if ((machid >> FLASH_SEL_BIT) & 0x1) {
-		flash = "mmc";
-		node = fdt_path_offset(gd->fdt_blob, flash);
-		if (node >= 0) {
-			ret = fdt_setprop_string(blob, node, "status", "okay");
-			if (ret < 0 && ret != -FDT_ERR_NOSPACE)
-				printf("Unable to set status of %s\n", flash);
-		} else {
-			printf("%s node not available\n", flash);
-		}
-
-		flash = "nand";
-		node = fdt_path_offset(gd->fdt_blob, flash);
-		if (node >= 0) {
-			ret = fdt_setprop_string(blob, node, "status", "disabled");
-			if (ret < 0 && ret != -FDT_ERR_NOSPACE)
-				printf("Unable to set status of %s\n", flash);
-		} else {
-			printf("%s node not available\n", flash);
-		}
-	}
-	return;
-}
-
 void qca_serial_init(struct ipq_serial_platdata *plat)
 {
 	int ret;
@@ -645,18 +603,6 @@ int ipq_board_usb_init(void)
 }
 #endif
 
-unsigned int get_dts_machid(unsigned int machid)
-{
-	/* By default nand flash enabled, so flash
-	 * selection bit in mach id in dts is zero.
-	 * For emmc flash this bit will be setted,
-	 * so clear this bit to make machid similar
-	 * to dts mach id.
-	 */
-	machid &= ~(1 << FLASH_SEL_BIT);
-	return machid;
-}
-
 __weak int ipq_get_tz_version(char *version_name, int buf_size)
 {
 	return 1;