mirror of
https://github.com/raspberrypi/pico-sdk.git
synced 2025-12-10 07:14:36 +01:00
Comment out CMake cyw43 vars which aren't really that useful in general i don't think (#2090)
This commit is contained in:
Graham Sanderson
GitHub
parent
a6ae2e6e4a
commit
5f607a9829
1 changed files with 41 additions and 41 deletions
|
|
@ -55,47 +55,47 @@ if (EXISTS ${PICO_CYW43_DRIVER_PATH}/${CYW43_DRIVER_TEST_FILE})
|
|||
hardware_dma
|
||||
hardware_exception
|
||||
)
|
||||
|
||||
if (CYW43_PIN_WL_DYNAMIC)
|
||||
# PICO_CMAKE_CONFIG: CYW43_PIN_WL_DYNAMIC, flag to indicate if cyw43 SPI pins can be changed at runtime, type=bool, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIN_WL_DYNAMIC=${CYW43_PIN_WL_DYNAMIC})
|
||||
endif()
|
||||
if (CYW43_DEFAULT_PIN_WL_REG_ON)
|
||||
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_REG_ON, gpio pin to power up the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_REG_ON=${CYW43_DEFAULT_PIN_WL_REG_ON})
|
||||
endif()
|
||||
if (CYW43_DEFAULT_PIN_WL_DATA_OUT)
|
||||
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_OUT, gpio pin for spi data out to the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_OUT=${CYW43_DEFAULT_PIN_WL_DATA_OUT})
|
||||
endif()
|
||||
if (CYW43_DEFAULT_PIN_WL_DATA_IN)
|
||||
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_IN, gpio pin for spi data in from the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_IN=${CYW43_DEFAULT_PIN_WL_DATA_IN})
|
||||
endif()
|
||||
if (CYW43_DEFAULT_PIN_WL_HOST_WAKE)
|
||||
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_HOST_WAKE, gpio (irq) pin for the irq line from the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_HOST_WAKE=${CYW43_DEFAULT_PIN_WL_HOST_WAKE})
|
||||
endif()
|
||||
if (CYW43_DEFAULT_PIN_WL_CLOCK)
|
||||
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CLOCK, gpio pin for the spi clock line to the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CLOCK=${CYW43_DEFAULT_PIN_WL_CLOCK})
|
||||
endif()
|
||||
if (CYW43_DEFAULT_PIN_WL_CS)
|
||||
# PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CS, gpio pin for the spi chip select to the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CS=${CYW43_DEFAULT_PIN_WL_CS})
|
||||
endif()
|
||||
if (CYW43_PIO_CLOCK_DIV_INT)
|
||||
# PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_INT, integer component of pio clock divider used for cyw43 comms, type=int, default=2, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_INT=${CYW43_PIO_CLOCK_DIV_INT})
|
||||
endif()
|
||||
if (CYW43_PIO_CLOCK_DIV_FRAC8)
|
||||
# PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_FRAC8, fractional component of pio clock divider used for cyw43 comms in range 0-255, type=int, default=0, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_FRAC8=${CYW43_PIO_CLOCK_DIV_FRAC8})
|
||||
endif()
|
||||
if (CYW43_PIO_CLOCK_DIV_DYNAMIC)
|
||||
# PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_DYNAMIC, flag used to enable dynamic pio clock divider API, type=bool, default=0, group=pico_cyw43_driver
|
||||
target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_DYNAMIC=${CYW43_PIO_CLOCK_DIV_DYNAMIC})
|
||||
endif()
|
||||
# commented out as I don't think there is a major use case for these to be settable from CMake command line vs board header, or target_compile_defitions
|
||||
# if (CYW43_PIN_WL_DYNAMIC)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_PIN_WL_DYNAMIC, flag to indicate if cyw43 SPI pins can be changed at runtime, type=bool, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIN_WL_DYNAMIC=${CYW43_PIN_WL_DYNAMIC})
|
||||
# endif()
|
||||
# if (CYW43_DEFAULT_PIN_WL_REG_ON)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_REG_ON, gpio pin to power up the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_REG_ON=${CYW43_DEFAULT_PIN_WL_REG_ON})
|
||||
# endif()
|
||||
# if (CYW43_DEFAULT_PIN_WL_DATA_OUT)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_OUT, gpio pin for spi data out to the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_OUT=${CYW43_DEFAULT_PIN_WL_DATA_OUT})
|
||||
# endif()
|
||||
# if (CYW43_DEFAULT_PIN_WL_DATA_IN)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_DATA_IN, gpio pin for spi data in from the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_DATA_IN=${CYW43_DEFAULT_PIN_WL_DATA_IN})
|
||||
# endif()
|
||||
# if (CYW43_DEFAULT_PIN_WL_HOST_WAKE)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_HOST_WAKE, gpio (irq) pin for the irq line from the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_HOST_WAKE=${CYW43_DEFAULT_PIN_WL_HOST_WAKE})
|
||||
# endif()
|
||||
# if (CYW43_DEFAULT_PIN_WL_CLOCK)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CLOCK, gpio pin for the spi clock line to the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CLOCK=${CYW43_DEFAULT_PIN_WL_CLOCK})
|
||||
# endif()
|
||||
# if (CYW43_DEFAULT_PIN_WL_CS)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_DEFAULT_PIN_WL_CS, gpio pin for the spi chip select to the cyw43 chip, type=int, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_DEFAULT_PIN_WL_CS=${CYW43_DEFAULT_PIN_WL_CS})
|
||||
# endif()
|
||||
# if (CYW43_PIO_CLOCK_DIV_INT)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_INT, integer component of pio clock divider used for cyw43 comms, type=int, default=2, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_INT=${CYW43_PIO_CLOCK_DIV_INT})
|
||||
# endif()
|
||||
# if (CYW43_PIO_CLOCK_DIV_FRAC8)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_FRAC8, fractional component of pio clock divider used for cyw43 comms in range 0-255, type=int, default=0, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_FRAC8=${CYW43_PIO_CLOCK_DIV_FRAC8})
|
||||
# endif()
|
||||
# if (CYW43_PIO_CLOCK_DIV_DYNAMIC)
|
||||
# # PICO_CMAKE_CONFIG: CYW43_PIO_CLOCK_DIV_DYNAMIC, flag used to enable dynamic pio clock divider API, type=bool, default=0, group=pico_cyw43_driver
|
||||
# target_compile_definitions(cyw43_driver_picow INTERFACE CYW43_PIO_CLOCK_DIV_DYNAMIC=${CYW43_PIO_CLOCK_DIV_DYNAMIC})
|
||||
# endif()
|
||||
|
||||
# Note: This is used by MP, so check for issues when making changes
|
||||
# e.g. Don't add new depenedences
|
||||
|
|
|
|||
Loading…
Add table
Reference in a new issue