Sander Vanheule ffb3f31f08 realtek: rtl838x: drop GS1900 MDIO reset GPIO ... The reset line wired to the RTL8231 on the GS1900 series may also connect to other external ICs on the board. On the GS1900-24E, the reset line is wired (via buffers) to the board's RTL8231 expanders and the RTL8218 phys. As these external devices (phys) are on different busses, the reset line shouldn't be specified on one bus or the other. Drop the reset specification from the generic GPIO description, so it can be added back on a per-device basis after confirming the behavior. Link: https://github.com/openwrt/openwrt/issues/18620 Fixes: fd978c2e80 ("realtek: Enable Zyxel GS1900's RTL8231 reset line") Signed-off-by: Sander Vanheule <sander@svanheule.net> (cherry picked from commit cdbd9eb448)		2026-02-24 21:43:48 +01:00
..
base-files	realtek: Split Zyxel GS1900-8 into v1 and v2	2025-02-22 12:32:35 +01:00
dts	realtek: rtl838x: drop GS1900 MDIO reset GPIO	2026-02-24 21:43:48 +01:00
files/firmware/rtl838x_phy
files-6.6	realtek: avoid interrupt storm on mass packet receive	2025-08-31 19:08:04 +02:00
image	realtek: HPE 1920-48G-PoE: allow fan speed control	2025-02-22 12:32:35 +01:00
patches-6.6	kernel: bump 6.6 to 6.6.120	2026-01-19 01:14:52 +01:00
profiles	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
rtl838x	realtek: add missing symbol	2025-05-20 20:49:01 +01:00
rtl839x	realtek: add missing symbol	2025-05-20 20:49:01 +01:00
rtl930x	realtek: add missing symbol	2025-05-20 20:49:01 +01:00
rtl931x	realtek: drop old RTL8231 driver	2025-02-22 12:32:35 +01:00
Makefile	realtek: trim default package selection	2025-01-04 20:40:02 +01:00