openwrt/package/boot
Tomasz Maciej Nowak 3a3d998c12 layerscape: resurrect support for FRDM-LS1012A
Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the
rest boards supported by LSDK.

0x000000000000-0x000000100000 : "bl2"
0x000000100000-0x000000500000 : "fip"
0x000000500000-0x000000600000 : "u-boot-env"
0x000000600000-0x000000a00000 : "reserved-1"
0x000000a00000-0x000000d00000 : "pfe"
0x000000d00000-0x000000f00000 : "reserved-2"
0x000000f00000-0x000001000000 : "dtb"
0x000001000000-0x000002000000 : "kernel"
0x000002000000-0x000004000000 : "ubifs"

Specification
SoC: LS1012A single core 800MHz
RAM: 512 MB DDR3
Flash: 64 MB QSPI NOR
Ethernet: 2x 10/100/1000 Mbps
Connectors: µUSB 3.0 OTG
            µUSB 2.0 (debugging & power input)
            2x 3.5mm jack for microphone & headphone (SGTL5000)
            Arduino Shield expansion with I2C, SPI, UART, and GPIO
            JTAG
LEDS: 3x (non-configurable)
Buttons: 1x (reset, non-configurable)

Be advised that erasing or writing 64MB flash takes some time to finish.
Do not reset the board until all operations end with success, otherwise
You'll need external tools to re-program the flash chip.

Installation
Follow the QSPI programing procedure for LS1012AFRWY board in
target/linux/layerscape/README, point 3.3.
Don't forget about updating U-Boot environment with MAC addresses of
ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1.

As the LSDK images do not support sysupgrade, nor do changes in this
commit, it's planed in upcoming submissions.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-03-12 12:59:44 +01:00
..
arm-trusted-firmware-mvebu packages/boot: bump arm-trusted-firmware-mvebu version 2020-02-22 18:21:37 +01:00
arm-trusted-firmware-sunxi arm-trusted-firmware-sunxi: Replace with official ARM version 2019-01-13 17:35:14 +01:00
at91bootstrap at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig 2019-08-17 23:08:44 +02:00
fconfig fconfig: cleanup Makefile 2019-04-06 19:14:06 +02:00
grub2 x86: add bootloader upgrade on sysupgrade 2020-03-01 21:36:00 +01:00
imx-bootlets treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
kexec-tools treewide: Remove self from MAINTAINER entries 2019-12-23 13:18:04 -08:00
kobs-ng kobs-ng: add header for integer definitions 2017-11-16 22:56:54 +01:00
rbcfg rbcfg: make package available for ath79 2020-01-23 15:28:02 +01:00
tfa-layerscape layerscape: resurrect support for FRDM-LS1012A 2020-03-12 12:59:44 +01:00
uboot-ar71xx uboot-ar71xx: fix musl host build 2019-01-22 13:29:46 +01:00
uboot-at91 uboot-at91: fix -Wformat-security 2019-08-17 23:08:10 +02:00
uboot-envtools uboot-envtools: mxs: add support for olimex, imx23-olinuxino 2020-03-08 15:10:55 +01:00
uboot-fritz4040 ipq40xx: add support for AVM FRITZ!Repeater 1200 2019-10-23 01:17:28 +02:00
uboot-imx6 uboot-imx6: bump to 2020.01 and refresh patches 2020-03-08 15:10:55 +01:00
uboot-kirkwood uboot-kirkwood: update to 2019.01 2019-02-17 19:22:39 +01:00
uboot-lantiq uboot-lantiq: fix compile with modern host dtc 2018-10-07 02:12:06 +02:00
uboot-layerscape layerscape: resurrect support for FRDM-LS1012A 2020-03-12 12:59:44 +01:00
uboot-mvebu uboot-mvebu: point to UBOOT_CONFIG when setting options 2020-03-01 21:36:00 +01:00
uboot-mxs uboot-mxs: bump to v2020.01 2020-03-08 15:10:55 +01:00
uboot-omap omap: support booting off different mmc devices 2019-11-20 10:46:19 +01:00
uboot-oxnas uboot-oxnas: fix memory leak in tool mkox820crc 2020-01-15 23:15:19 +01:00
uboot-sunxi sunxi: add support for FriendlyARM Nano PI NEO Air dev board 2019-12-13 12:20:09 +01:00
uboot-tegra tegra: add vendor string to device name 2019-05-15 13:34:23 +02:00
uboot-zynq uboot-zynq: update to 2019.07 2019-09-01 18:38:05 +02:00