mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-02 21:23:47 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 5
openwrt/target/linux/mediatek/dts
History
Juan Pedro Paredes Caballero fdbbb8415f mediatek: filogic: Add support for cudy wr3000h 
The manufacturer Cudy usually releases signed openwrt firmware, to
facilitate the migration from the proprietary version to the official
versions of openwrt. In contact with the manufacturer tells me that only
releases the firmware of the WR3000H if and only if
there is an official version. With this proposal I pretend to have an
initial operative version so that they do their part, and facilitate to
the users the possibility of using openwrt. In the present state, it is
only possible to use this firmware by uploading and installing it with
UART connection.

AX3000 2.5G Dual Band Wi-Fi 6 Mesh Router (WR3000H)

Hardware
--------
MediaTek MT7981 WiSoC
256MB DDR3 RAM
128MB SPI-NAND (XMC XM25QH128C)
MediaTek MT7981 2x2 DBDC 802.11ax 2T2R (2.4 / 5)
4 LAN MediaTek MT7531 PHY
1 WAN RTL8221B-VB-CG 2.5Gbps PHY (C22)
2 Radios MT7976CN
UART: 115200 8N1 3.3V

MAC:
LAN MAC: label mac
WAN MAC: label mac + 1
2.4G MAC: label mac
5G MAC: label mac + 1 with LA bit set

Installation
------------

1. Connect to the serial port as described in the "Hardware" section.

2. Power on the device + press reset pin. Keep pressing reset pin to
   enter the U-Boot shell (The recovery.bin image load process must fail).

3. Download the OpenWrt initramfs image. Place it on an TFTP server
   connected to the Cudy LAN ports. Make sure the server is reachable at
   192.168.1.88. Rename the image to "cudy3000h.bin"

4. Download and boot the OpenWrt initramfs image.

   $ tftpboot 0x46000000 cudy3000h.bin; bootm 0x46000000

5. IMPORTANT: Make backup from original firmware. System -> Backup
   /Flash Firmware -> Save mtdblock contents. All mtdblock one by one,
keep unaltered (BL2, u-boot-env, Factory, bdinfo, FIP, and ubi).

6. Transfer the OpenWrt sysupgrade image to the device using scp.
   Install with sysupgrade.

Warning for BL2 and U-BOOT developers
-------------------------------------
The nand partition layout from vendor is slightly diferent from "standard".
The FIP partition starts at 0x3c0000 be carefull with BL2 to BL31.
The UBI partition start at 0x5c0000 be carefull.
DO NOT OVERWRITE bdinfo partition it contains hardware MAC definition
Layout is start-end (not start size)
  - 0x000000000000-0x000007800000 : "nmbm0"
          - 0x000000000000-0x000000100000 : "bl2"
          - 0x000000100000-0x000000180000 : "u-boot-env"
          - 0x000000180000-0x000000380000 : "factory"
          - 0x000000380000-0x0000003c0000 : "bdinfo"
          - 0x0000003c0000-0x0000005c0000 : "fip"
          - 0x0000005c0000-0x0000045c0000 : "ubi"
ALLWAYS for U-BOOT operations check this
setenv mtdids nmbm0=nmbm0
setenv mtdparts nmbm0:1024k(bl2),512k(u-boot-env),2048k(factory),256k(bdinfo),2048k(fip),65536k(ubi)

Signed-off-by: Juan Pedro Paredes Caballero <juanpedro.paredes@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17458
(cherry picked from commit 9d66b8b312)
Link: https://github.com/openwrt/openwrt/pull/19124
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-06-17 23:06:01 +02:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: fix wrong compatible string 2024-10-06 21:56:04 +02:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-netgear-wax206.dts mediatek-mt7622: netgear-wax206 fix wifi leds 2025-01-24 22:25:43 +01:00
mt7622-reyee-ax3200-e5.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-smartrg-SDG-841-t6.dts mediatek: mt7622: add Adtran SmartRG SDG-841t6 device 2024-10-15 17:55:05 +01:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: u7623: fix network switch enumeration 2025-03-17 16:21:23 +01:00
mt7629-iptime-a6004mx.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7629-linksys-ea7500-v3.dts mediatek: Add support for Linksys EA7500 v3 2024-08-15 00:13:20 +02:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981a-edgecore-eap111.dts mediatek: EAP111: add label-mac-device 2024-08-10 18:00:14 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-abt-asr3000.dts mediatek: add ABT ASR3000 support 2024-07-21 16:13:06 +02:00
mt7981b-asus-rt-ax52.dts mediatek: filogic: add support for ASUS RT-AX52 2025-05-04 16:36:49 +02:00
mt7981b-cetron-ct3003.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-cmcc-a10-stock.dts mediatek: add support for CMCC A10 2025-03-15 11:48:57 +01:00
mt7981b-cmcc-a10-ubootmod.dts mediatek: add support for CMCC A10 2025-03-15 11:48:57 +01:00
mt7981b-cmcc-a10.dtsi mediatek: add support for CMCC A10 2025-03-15 11:48:57 +01:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m.dts mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-confiabits-mt7981.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981b-cudy-ap3000-v1.dts mediatek: cudy: fixes typo for spi and mtd properties 2025-01-24 22:42:39 +01:00
mt7981b-cudy-ap3000outdoor-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-24 22:43:13 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-24 22:43:13 +01:00
mt7981b-cudy-re3000-v1.dts mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
mt7981b-cudy-tr3000-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-24 22:43:13 +01:00
mt7981b-cudy-wr3000-v1.dts mediatek: filogic: prevent faulty mac address assignment 2024-12-10 01:06:10 +01:00
mt7981b-cudy-wr3000h-v1.dts mediatek: filogic: Add support for cudy wr3000h 2025-06-17 23:06:01 +02:00
mt7981b-cudy-wr3000s-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-24 22:43:13 +01:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts filogic: Add support for D-Link AQUILA PRO AI M30 2024-03-31 19:01:20 +02:00
mt7981b-gatonetworks-gdsp.dts mediatek: filogic: add support for GatoNetworks GDSP 2024-11-28 18:47:13 +00:00
mt7981b-glinet-gl-mt2500.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981b-glinet-gl-mt3000.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: filogic: convert H3C Magic NX30 Pro to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-huasifei-wh3000.dts mediatek: filogic: add support for Huasifei WH3000 2025-04-10 20:29:37 +02:00
mt7981b-jcg-q30-pro.dts mediatek: filogic: convert JCG Q30 PRO to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-keenetic-kn-3811.dts mediatek/filogic: add Keenetic KN-3811 support 2025-02-26 23:32:40 +01:00
mt7981b-keenetic-kn-3911.dts mediatek/filogic: add Keenetic KN-3911 support 2025-02-26 23:32:40 +01:00
mt7981b-mercusys-mr80x-v3.dts mediatek: filogic: fix mistaken executable bit on dts file 2025-05-07 20:58:33 +02:00
mt7981b-netis-nx31.dts mediatek: add support for netis NX31 2025-04-10 20:18:23 +02:00
mt7981b-nokia-ea0326gmp.dts mediatek: fix wps button for nokia ea0326gmp 2024-06-07 14:19:39 +02:00
mt7981b-openembed-som7981.dts mediatek: update openembed som7981 support 2024-12-26 14:13:35 +01:00
mt7981b-openwrt-one.dts mediatek: set mac increment to 7 for the 5G radio on OpenWrt One 2024-11-05 13:30:21 +01:00
mt7981b-qihoo-360t7.dts mediatek: filogic: convert Qihoo 360T7 to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-routerich-ax3000-common.dtsi mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-28 18:49:33 +00:00
mt7981b-routerich-ax3000-ubootmod.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-28 18:49:33 +00:00
mt7981b-routerich-ax3000-v1.dts mediatek: add support for Routerich AX3000 v1 2025-05-08 20:35:36 +02:00
mt7981b-routerich-ax3000.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-28 18:49:33 +00:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981b-unielec-u7981-01-nand.dts mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-unielec-u7981-01.dtsi mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-wavlink-wl-wn573hx3.dts mediatek: filogic: add support for WAVLINK WL-WN573HX3 2025-05-07 21:03:31 +02:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: filogic: Add support for Wavlink WL-WN586X3 2024-06-09 14:58:25 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: convert Xiaomi AX3000T to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: fix nmbm configuration mismatch (Xiaomi AX3000t) 2025-02-09 23:19:11 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: Xiaomi AX3000t: enable SPI calibration 2025-03-17 16:14:27 +01:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: convert Xiaomi WR30U to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: YunCore AX835: fix voltage regulator 2024-11-04 10:36:11 +01:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: add support for Zbtlink ZBT-Z8103AX 2023-12-26 00:02:19 +01:00
mt7981b-zyxel-nwa50ax-pro.dts treewide: rename ZyXEL to Zyxel 2024-08-25 15:08:25 +02:00
mt7986a-acelink-ew-7886cax.dts mediatek: filogic: add Acelink EW-7886CAX support 2023-12-05 09:06:47 +01:00
mt7986a-acer-predator-w6.dts mediatek: improve device tree for Acer Predator Connect W6 2024-11-28 18:49:11 +00:00
mt7986a-acer-predator-w6d.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-28 18:49:13 +00:00
mt7986a-acer-vero-w6m.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-28 18:49:13 +00:00
mt7986a-acer-w6-common.dtsi mediatek: improve device tree for Acer Predator Connect W6 2024-11-28 18:49:11 +00:00
mt7986a-asus-rt-ax59u.dts mediatek: apply bootloader work-around for affected ASUS devices 2025-02-16 20:43:53 +00:00
mt7986a-asus-tuf-ax4200.dts mediatek: apply bootloader work-around for affected ASUS devices 2025-02-16 20:43:53 +00:00
mt7986a-asus-tuf-ax6000.dts mediatek: apply bootloader work-around for affected ASUS devices 2025-02-16 20:43:53 +00:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: filogic: bpi-r3-mini: fix power on M.2 slot 2024-02-16 13:56:01 +00:00
mt7986a-dlink-aquila-pro-ai-m60-a1.dts mediatek: Fix primary MAC of D-Link M60 2025-01-01 22:43:26 +01:00
mt7986a-glinet-gl-mt6000.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7986a-jdcloud-re-cp-03.dts mediatek: increase phy assert time for jdcloud re-cp-03 2024-08-08 20:00:12 +02:00
mt7986a-netcore-n60.dts mediatek: filogic: convert Netcore N60 to fitblk 2024-08-28 15:11:51 +01:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: add support for Ruijie RG-X60 Pro 2024-06-05 17:44:11 +01:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-archer-ax80-v1.dts mediatek: add support for TP-Link Archer AX80v1(US/RU/CA) 2025-06-08 21:07:36 +02:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: filogic: switch TP-LINK XDR series to fitblk 2024-04-09 15:07:41 +01:00
mt7986a-tplink-tl-xdr4288.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6086.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6088.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xtr8488.dts mediatek: add support for TP-Link TL-XTR8488 2024-07-25 22:54:16 +02:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts 2024-03-08 16:51:35 +08:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: filogic: fix mt7986a-zyxel-ex5601-t0-stock.dts model name and eth1 wan definition 2025-02-13 00:32:30 +01:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: filogic: convert Zyxel EX5601-T0 to fitblk 2024-08-28 15:11:51 +01:00
mt7986a-zyxel-ex5700-telenor.dts filogic: add missing 2.5G PHY LEDs configuration for Zyxel EX5700 2024-09-06 22:17:45 +02:00
mt7986b-mercusys-mr90x-v1-common.dtsi mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-12-10 01:08:03 +01:00
mt7986b-mercusys-mr90x-v1-ubi.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-12-10 01:08:03 +01:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-12-10 01:08:03 +01:00
mt7986b-netgear-wax220.dts mediatek-filogic: fix wax220 wifi leds 2025-01-20 22:00:24 +01:00
mt7986b-tplink-re6000xd.dts mediatek: filogic: add support for TP-LINK RE6000XD 2024-07-04 22:14:32 +02:00
mt7988a-arcadyan-mozart.dts mediatek: filogic: add Arcadyan Mozart platform 2024-11-05 13:30:21 +01:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988d-smartrg-SDG-8733A.dts mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00