INAGAKI Hiroshi f305ce5c35 ramips: add support for I-O DATA WN-AC1167GR ... I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on MediaTek MT7620A. Specification: - SoC : MediaTek MT7620A - RAM : DDR2 64 MB - Flash : SPI-NOR 8MB - WLAN : 2.4/5 GHz, 2T2R - 2.4 GHz: MT7620A (SoC) - 5 GHz : MT7612E - Ethernet: 10/100/1000 Mbps (ext. MT7530) - LED/key : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J2: TX, GND, RX, Vcc from SoC side - 115200n8 Flash instruction using factory image: 1. Boot WN-AC1167GR normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2019-02-14 16:56:14 +01:00
..
base-files	ramips: add support for I-O DATA WN-AC1167GR	2019-02-14 16:56:14 +01:00
dts	ramips: add support for I-O DATA WN-AC1167GR	2019-02-14 16:56:14 +01:00
files-4.14/drivers	ramips: fix two-way hash and auto ageout on MT7621	2019-01-23 09:27:30 +01:00
image	ramips: add support for I-O DATA WN-AC1167GR	2019-02-14 16:56:14 +01:00
mt76x8	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
mt7620	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
mt7621	ramips: mt7621: disable CONFIG_MTD_SPLIT_FIRMWARE	2018-12-13 13:39:56 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.99	2019-02-14 16:45:01 +01:00
rt288x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
rt305x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
rt3883	ramips: rt3883: drop jimage support	2019-01-26 21:46:33 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00