Edward Chow db0300cb1b ath79: port buffalo WZR-450HP2 from ar71xx ... Referencing commit a1837135e0 Hardware -------- SoC: Qualcomm Atheros QCA9558 RAM: 128M DDR2 (Nanya NT5TU64M16HG-AC) FLASH: 128M SPI-NAND (Spansion S34ML01G100TFI00) WLAN: QCA9558 3T3R 802.11 bgn ETH: Qualcomm Atheros QCA8337 UART: 115200 8n1 BUTTON: Reset - WPS - "Router" switch LED: 2x system-LED, 2x wlan-LED, 1x internet-LED, 2x routing-LED LEDs besides the ethernet ports are controlled by the ethernet switch MAC Address: use address(sample 1) source label cc:e1:d5:xx:xx:ed art@macaddr_wan lan cc:e1:d5:xx:xx:ec art@macaddr_lan wan cc:e1:d5:xx:xx:ed $label WiFi4_2G cc:e1:d5:xx:xx:ec art@cal_ath9k Installation from Serial Console ------------ 1. Connect to the serial console. Power up the device and interrupt autoboot when prompted 2. Connect a TFTP server reachable at 192.168.11.10/24 to the ethernet port. Serve the OpenWrt initramfs image as "openwrt.bin" 3. Boot the initramfs image using U-Boot ath> tftpboot 0x84000000 openwrt.bin ath> bootm 0x84000000 4. Copy the OpenWrt sysupgrade image to the device using scp and install it like a normal upgrade (with no need to keeping config since no config from "previous OpenWRT installation" could be kept at all) # sysupgrade -n /path/to/openwrt/sysupgrade.bin Installation from Web Interface ------------ To flash just do a firmware upgrade from the stock firmware (Buffalo branded dd-wrt) with squashfs-factory.bin Signed-off-by: Edward Chow <equu@openmail.cc> Link: https://github.com/openwrt/openwrt/pull/17227 (cherry picked from commit 42254d3f5f) Link: https://github.com/openwrt/openwrt/pull/17359 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2024-12-26 14:26:18 +01:00
..
base-files	ath79: port buffalo WZR-450HP2 from ar71xx	2024-12-26 14:26:18 +01:00
config-default	ath79: disable ath79 USB phy drivers by default	2024-09-22 23:58:47 +02:00
target.mk	treewide: replace wpad-basic-wolfssl default	2023-02-04 02:35:03 +01:00