openwrt/target/linux/ramips
Shiji Yang 2cce634a9e
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
ramips: disable build TP-Link EAP235-Wall
After investigating the EAP235-Wall u-boot GPL code, it was found that
the u-boot of this device directly loads the kernel from the SPI NOR
Flash direct access address. However, due to hardware limitation, MT7621
can only remap the first 4MiB Flash. Excluding some partitions before
the kernel, this device can only boot kernels smaller than 0x360000.
This means that unless you install a modified bootloader, the mainline
OpenWrt will no longer work on this model.

Closes: https://github.com/openwrt/openwrt/issues/20500
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/20509
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-11-17 10:33:17 +01:00
..
base-files/etc
dts
files/drivers
image
mt76x8
mt7620
mt7621
patches-6.12
rt288x
rt305x
rt3883
Makefile
modules.mk