Ding Tengfei e07014e70b ar71xx: add support for COMFAST CF-E355AC v2 ... COMFAST CF-E355AC v2 is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9531 + QCA9886. Short specification: - 2x 10/100 Mbps Ethernet, with PoE support - 128MB of RAM (DDR2) - 16 MB of FLASH - 2T2R 2.4 GHz, 802.11b/g/n - 2T2R 5 GHz, 802.11ac/n/a, WAVE 2 - built-in 4x 3 dBi antennas - output power (max): 500 mW (27 dBm) - 1x RGB LED, 1x button - built-in watchdog chipset Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Ding Tengfei <dtf@comfast.cn> [updated kernel config for both boards] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2018-02-22 18:53:22 +01:00
..
base-files	ar71xx: add support for COMFAST CF-E355AC v2	2018-02-22 18:53:22 +01:00
files	ar71xx: add support for COMFAST CF-E355AC v2	2018-02-22 18:53:22 +01:00
generic	ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2	2018-02-22 18:53:22 +01:00
image	ar71xx: add support for COMFAST CF-E355AC v2	2018-02-22 18:53:22 +01:00
mikrotik	ar71xx: reorganize kernel configuration	2018-01-13 19:54:45 +01:00
nand	ar71xx: reorganize kernel configuration	2018-01-13 19:54:45 +01:00
patches-4.4	ar71xx: disable 40Mhz refclk for QCA953x	2018-02-22 18:53:22 +01:00
patches-4.9	ar71xx: disable 40Mhz refclk for QCA953x	2018-02-22 18:53:22 +01:00
tiny	ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices	2018-01-13 19:54:45 +01:00
config-4.4	ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2	2018-02-22 18:53:22 +01:00
config-4.9	ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2	2018-02-22 18:53:22 +01:00
Makefile	ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices	2018-01-13 19:54:45 +01:00
modules.mk	ar71xx: add LED driver NU801	2015-12-11 15:04:57 +00:00