Chukun Pan e018afcfc6 mediatek: filogic: add Qihoo 360T7 support ... Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: ESMT F50L1G41LB 128MB RAM: MT5CC128M16JR-EK 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset, WPS Power: DC 12V 1A Flash instructions: 1. Attach UART, boot the stock firmware until the message about failsafe mode appears. 2. Enter failsafe mode by pressing "f" and "Enter" 3. Type "mount_root", then run "fw_setenv bootmenu_delay 3" 4. Back up all mtd partitions before flashing. 5. Reboot, U-Boot now presents a menu. 6. Connect to your PC via the Gigabit port of the router, set a static ip on the ethernet interface of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 7. Select "Upgrade ATF BL2", then use this file: openwrt-mediatek-filogic-qihoo_360t7-preloader.bin 8. Select "Upgrade ATF FIP", then use this file: openwrt-mediatek-filogic-qihoo_360t7-bl31-uboot.fip 9. Download the initramfs image, and type "reset", waiting for tftp recovery to complete. a. After openwrt boots up, perform sysupgrade. Note: 1. Since NMBM is disabled, we must back up all partitions. 2. Flash instructions is based on commit 28df7f7. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit dc2d4d7393) Signed-off-by: Daniel Golle <daniel@makrotopia.org>		2023-05-29 13:04:14 +01:00
..
filogic.mk	mediatek: filogic: add Qihoo 360T7 support	2023-05-29 13:04:14 +01:00
gen_scatterfile.sh	target: use SPDX license identifiers on scripts	2021-02-10 15:47:23 +01:00
Makefile	mediatek: introduce KERNEL_LOADADDR to Device/Default template	2023-04-05 17:12:55 +01:00
mt7622.mk	mediatek: fix, clean and unify SD card image generation	2023-05-29 13:04:14 +01:00
mt7623.mk	mediatek: fix, clean and unify SD card image generation	2023-05-29 13:04:14 +01:00
mt7629.mk	mediatek: introduce KERNEL_LOADADDR to Device/Default template	2023-04-05 17:12:55 +01:00