David Bauer dcc923a4c4 ramips: fix Archer C2 v1 5GHz MAC address ... The TP-Link Archer C2 v1 previously had a generic Ralink MAC address set for the 5GHz radio (MT7610), as the caldata does only contain a generic MAC address. Set the MAC address from the vendor firmware for the 5GHz radio to assign unique MAC addresses to every device. Signed-off-by: David Bauer <mail@david-bauer.net>		2020-01-02 21:41:58 +01:00
..
base-files	ramips: allow to set switchdev by board in ramips_set_preinit_iface	2019-12-17 15:09:48 +01:00
dts	ramips: fix Archer C2 v1 5GHz MAC address	2020-01-02 21:41:58 +01:00
files-4.14/drivers	ramips: ethernet: Replace random_ether_addr with eth_hw_addr_random	2019-10-27 14:13:47 +01:00
image	ramips: add support for TP-Link RE200 v1	2019-12-31 13:23:55 +01:00
mt76x8	ramips: fix switch setup for Xiaomi MiWiFi Nano	2019-12-31 12:59:23 +01:00
mt7620	ramips: convert TP-Link MT7620 boards to tpt trigger	2020-01-02 21:41:58 +01:00
mt7621	ramips: add label MAC address for Mikrotik RB750Gr3	2019-12-23 02:24:55 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.158	2019-12-10 09:50:42 +01:00
rt288x	ramips: rt288x: use flash location for wan_mac in 02_network	2019-12-12 13:11:49 +01:00
rt305x	ramips: rt305x: use flash location for wan_mac in 02_network	2019-12-12 13:11:58 +01:00
rt3883	ramips: fix USB LED for Belkin F9K1109v1	2019-12-20 15:54:33 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00