Hannu Nyman dba362772e ipq806x: remove "firmware" partition definition from netgear routers ... Remove the "firmware" partition definition from the DTS of R7800 to fix sysupgrade. Commit 4645a6d3 defined CONFIG_MTD_SPLIT_UIMAGE_FW=y for ipq806x and that causes mtd to misbehave as additional kernel and ubi partitions are detected from inside the "firmware" partition. [ 1.111324] 0x000001480000-0x000001880000 : "kernel" [ 1.121005] 0x000001880000-0x000007900000 : "ubi" [ 1.283912] 0x000007900000-0x000008000000 : "reserve" [ 1.296407] 0x000001480000-0x000007900000 : "firmware" [ 1.468043] no rootfs found after FIT image in "firmware" [ 2.426860] 2 uimage-fw partitions found on MTD device firmware [ 2.426931] 0x000001480000-0x000001880000 : "kernel" [ 2.440420] 0x000001880000-0x000007900000 : "ubi" Both kernel and ubi are already defined in DTS, so this duplication leads into errors in sysupgrade: Writing from <stdin> to kernel ... ubiattach: error!: strtoul: unable to parse the number '6 mtd10' ubiattach: error!: bad MTD device number: "6 mtd10" The partition is defined to same area as kernel+ubi, and is not needed for sysupgrade anymore. Remove it to fix things. Only tested for the R7800 but all of them should behave equal. Fixes: FS#1617 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> [squashed commits, add "tested on" note] Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-06-27 22:10:23 +02:00
..
imagebuilder	imagebuilder: remove split patch dirs from imagebuilder archive	2018-03-07 09:59:08 +01:00
linux	ipq806x: remove "firmware" partition definition from netgear routers	2018-06-27 22:10:23 +02:00
sdk	sdk: change base feed fallback to git.openwrt.org	2018-01-11 18:20:07 +01:00
toolchain	merge: etc: update remaining files	2017-12-08 19:41:18 +01:00
Config.in	config: set ARCH if powerpc64 is selected in the configuration	2017-10-24 13:24:04 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00