mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-14 23:09:45 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
openwrt/target/linux/ath79/dts
History
Chuanhong Guo 4d5dae2741 ath79: add support for PISEN WMB001N 
Specifications:
- SoC: AR9341
- RAM: 64M
- Flash: 16M
- Ethernet: 1 * FE port
- WiFi: ar934x-wmac
- Sound: WM8918 DAC
         1 * 3.5mm headphone jack
         2 * RCA connectors for speakers
         1 * SPDIF out
- USB: 1 * USB2.0 port

Flash instruction:
 Upload generated factory image via vendor's web interface.

Notes:
A. Audio stuff:
 1. Since AR934x, all pins for peripheral blocks can be mapped to
    any available GPIOs. We currently don't have a PCM/I2S driver
    for AR934x so pinmux for i2s and SPDIF are bound to i2c gpio
    node. This should be moved into I2S node when a PCM/I2S driver
    is available.
 2. The i2c-gpio node is for WM8918. DT binding for it can't be added
    currently due to a missing clock from I2S PLL.

B. Factory image:
 Image contains a image header and a tar.gz archive.
 1. Header: A 288 byte header that has nothing to do with appended
    tarball. Format:
     0x0-0x7 and 0x18-0x1F: magic values
     0x20: Model number string
     0xFC: Action string. It's either "update" or "backup"
     0x11C: A 1 byte checksum. It's XOR result of 0x8-0x11B
    Firmware doesn't care about the rest of the header as long as
    checksum result is correct.
    The same header is used for backup and update routines so the
    magic values and model number can be obtained by generating a
    backup bin and grab values from it.
 2. Tarball: It contains two files named uImage and rootfs, which
    will be flashed into corresponding mtd partition.
 Writing a special utility that can only output a fixed binary
 blob is overkill so factory image header is placed under
 image/bin instead.

C. LED
 The wifi led has "Wi-Fi" marked on the case but vendor's firmware
 used it as system status indicator. I did the same in this device
 support patch.

D. Firmware
 Factory u-boot is built without 'savenv' support so it's impossible
 to change kernel offset. A 2MB kernel partition won't be enough in
 the future. OKLI loader is used here to migrate this problem:
  1. add OKLI image magic support into uImage parser.
  2. build an OKLI loader, compress it with lzma and add a normal
     uImage header.
  3. flash the loader to where the original kernel supposed to be.
  4. create a uImage firmware using OKLI loader.
  5. flash the created firmware to where rootfs supposed to be.
 By doing so, u-boot will start OKLI loader, which will then load
 the actual kernel at 0x20000.

 The kernel partition is 2MB, which is too much for our loader.
 To save this space, "mtd-concat" is used here:
  1. create a 64K (1 erase block) partition for OKLI loader and
     create another partition with the left space.
  2. concatenate rootfs and this partition into a virtual flash.
  3. use the virtual flash for firmware partition.

 Currently OKLI loader is flashed with factory image only.
 sysupgrade won't replace it. Since it only has one function
 and it works for several years, its unlikely to have some bugs
 that requires a replacement.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-08-08 21:00:59 +08:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
ar1022_iodata_wn-ag300dgr.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7100.dtsi ath79: fix dtc compiler warnings 2018-12-12 12:28:26 +01:00
ar7161_adtran_bsap1800-v2.dts ath79: add support for Bluesocket BSAP1880 board 2019-07-17 22:59:29 +02:00
ar7161_adtran_bsap1840.dts ath79: add support for Bluesocket BSAP1880 board 2019-07-17 22:59:29 +02:00
ar7161_adtran_bsap1880.dtsi ath79: add support for Bluesocket BSAP1880 board 2019-07-17 22:59:29 +02:00
ar7161_aruba_ap-105.dts ath79: add support for Aruba AP-105 2019-05-18 16:44:41 +02:00
ar7161_buffalo_wzr-hp-ag300h.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7161_dlink_dir-825-b1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7161_jjplus_ja76pf2.dts ath79: add support for jjPlus JA76PF2 2019-03-18 20:43:09 +01:00
ar7161_netgear_wndr3700.dts ath79: specify "firmware" partition format for WNDR3700 and v2 2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3700.dtsi ath79: convert Netgear WNDR3700 series to gpio-keys 2019-05-18 17:59:49 +02:00
ar7161_netgear_wndr3700v2.dts ath79: specify "firmware" partition format for WNDR3700 and v2 2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3800.dts ath79: specify "firmware" partition format for Netgear WNDR3800 2018-11-24 08:46:59 +01:00
ar7161_ubnt_routerstation-pro.dts ath79: add syscon compatible property to ar7100 ethernet nodes 2018-09-06 21:35:53 +02:00
ar7161_ubnt_routerstation.dts ath79: initial support for Ubiquiti RouterStation and RouterStation Pro 2018-08-27 19:31:17 +02:00
ar7161_ubnt_routerstation.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240.dtsi ath79: use ar8216 for builtin switch 2019-03-24 01:44:27 +01:00
ar7240_buffalo_whr-g301n.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7240_netgear_wnr612-v2.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_netgear_wnr612-v2.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar7240_on_n150r.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr74xn-v1.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7240_tplink_tl-wr740n-v1.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr740n-v3.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr741-v1.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr743nd-v1.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr841-v5.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr941-v4.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7241.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
ar7241_tplink.dtsi ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7241_tplink_tl-mr3x20.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3220-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3420-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-wr841-v7.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar7241_tplink_tl-wr842n-v1.dts ath79: add support for TP-Link TL-WR842N/ND v1 router 2018-12-15 21:35:45 +01:00
ar7241_ubnt_airrouter.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
ar7241_ubnt_bullet-m.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7241_ubnt_nanostation-m.dts ath79: align naming of Ubiquiti Nanostation M 2019-03-18 20:55:24 +01:00
ar7241_ubnt_rocket-m.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar7241_ubnt_unifi.dts ath79: Define firmware partition format to all boards where applicable 2018-12-06 13:28:22 +01:00
ar7241_ubnt_xm.dtsi ath79: Define firmware partition format to all boards where applicable 2018-12-06 13:28:22 +01:00
ar7241_ubnt_xm_outdoor.dtsi ath79: split ubnt outdoor device leds into separate dtsi 2018-12-03 07:58:49 +01:00
ar7242.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
ar7242_avm_fritz300e.dts ath79: dts: Unify naming of gpio-keys nodes 2019-01-26 21:09:12 +01:00
ar7242_buffalo_bhr-4grv.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_buffalo_wzr-bhr.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar7242_tplink_tl-wr2543-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
ar9132.dtsi ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x 2018-08-28 11:26:53 +02:00
ar9132_tplink_tl-wa901nd-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr941-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr1043nd-v1.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
ar9330.dtsi ath79: ar9330: add missing watchdog node 2019-07-17 16:49:20 +02:00
ar9330_glinet_gl-ar150.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar9330_pqi_air-pen.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9331_8dev_carambola2.dts ath79: add support for 8devices Carambola2 development board 2019-06-05 10:24:45 +02:00
ar9331_alfa-network_ap121f.dts ath79: add support for ALFA Network AP121F 2019-07-31 08:38:01 +02:00
ar9331_embeddedwireless_dorin.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar9331_etactica_eg200.dts ath79: fix pinmux for ar933x devices 2019-05-15 13:34:24 +02:00
ar9331_pisen_wmm003n.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-mr10u.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-mr3020-v1.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-mr3040-v2.dts ath79: fix pinmux for ar933x devices 2019-05-15 13:34:24 +02:00
ar9331_tplink_tl-wr703n.dts ath79: rename dts/image using manufacturer_board scheme 2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-wr710n-v1.dts ath79: add TP-Link TL-WR710N v1 2019-03-24 01:44:27 +01:00
ar9331_tplink_tl-wr740n-v4.dts ath79: rename TL-WR740ND-v4 to TL-WR740N-v4 2019-02-14 16:56:14 +01:00
ar9331_tplink_tl-wr741nd-v4.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-wr741nd-v4.dtsi ath79: fix pinmux for ar933x devices 2019-05-15 13:34:24 +02:00
ar9341.dtsi ath79: ar934x: Update dts for current ag71xx driver 2018-07-30 10:43:33 +02:00
ar9341_pcs_cr3000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9341_pisen_wmb001n.dts ath79: add support for PISEN WMB001N 2019-08-08 21:00:59 +08:00
ar9341_tplink_tl-wr841-v8.dts ath79: add support for TP-Link TL-WR841N/ND v8 2018-12-31 13:28:31 +01:00
ar9341_tplink_tl-wr842n-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9342_iodata_etg3-r.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
ar9342_ubnt_bullet-m-xw.dts ath79: ubnt-bullet-m-xw: Remove eth1 disabled node 2018-12-27 16:02:25 +01:00
ar9342_ubnt_lap-120.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanobeam-ac.dts ath79: Add support for Ubiquiti NanoBeam AC 2019-03-22 00:40:29 +01:00
ar9342_ubnt_nanostation-ac-loco.dts ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanostation-ac.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9342_ubnt_nanostation-m-xw.dts ath79: Add support for Ubiquiti Nanostation M (XW) 2019-03-05 03:15:52 +01:00
ar9342_ubnt_wa.dtsi ath79: add SoC or family compatible 2018-12-06 13:28:22 +01:00
ar9342_ubnt_xw.dtsi ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
ar9344.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
ar9344_comfast_cf-e120a-v3.dts ath79: add support for COMFAST CF-E120A v3 2019-02-28 11:26:10 +01:00
ar9344_dlink_dir-8x5.dtsi ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-825-c1.dts ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-835-a1.dts ath79: add d-link dir-825-c1 and dir-835-a1 2018-12-17 00:21:34 +01:00
ar9344_ocedo_raccoon.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
ar9344_pcs_cap324.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_pcs_cr5000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_qihoo_c301.dts ath79: add support for Qihoo C301 2019-07-16 09:51:03 +08:00
ar9344_tplink_cpe210-v1.dts ath79: add support for TP-Link CPE210 v1 2019-08-07 18:04:03 +02:00
ar9344_tplink_cpe220-v2.dts ath79: add support for TP-Link CPE220 v2 2019-08-07 18:04:03 +02:00
ar9344_tplink_cpe510-v1.dts ath79: add support for TP-Link CPE510 v1 2019-08-07 18:04:03 +02:00
ar9344_tplink_cpe510-v2.dts ath79: add support for TP-Link CPE510-v2/v3 2019-07-18 00:06:55 +02:00
ar9344_tplink_cpe510-v3.dts ath79: add support for TP-Link CPE510-v2/v3 2019-07-18 00:06:55 +02:00
ar9344_tplink_cpe510.dtsi ath79: provide common DTSI for CPE510 v2/v3 and CPE610 2019-08-07 18:04:03 +02:00
ar9344_tplink_cpe610-v1.dts ath79: provide common DTSI for CPE510 v2/v3 and CPE610 2019-08-07 18:04:03 +02:00
ar9344_tplink_cpexxx-v1.dtsi ath79: add support for TP-Link CPE210 v1 2019-08-07 18:04:03 +02:00
ar9344_tplink_cpexxx.dtsi ath79: provide common DTSI for CPE510 v2/v3 and CPE610 2019-08-07 18:04:03 +02:00
ar9344_tplink_tl-wdr3600-v1.dts ath79: Use -v1 suffix for TP-Link WDR3600/4300 2019-07-03 07:45:00 +02:00
ar9344_tplink_tl-wdr4300-v1.dts ath79: Use -v1 suffix for TP-Link WDR3600/4300 2019-07-03 07:45:00 +02:00
ar9344_tplink_tl-wdr4300.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_wd_mynet-n750.dts ath79: add support for WD My Net N750 2019-05-27 22:44:08 +02:00
ar9344_wd_mynet-wifi-rangeextender.dts ath79: convert WD MyNet Range Extender to gpio-keys 2019-05-18 17:59:49 +02:00
ar9344_winchannel_wb2000.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
ar9344_zbtlink_zbt-wd323.dts ath79: Add support for ZBT-WD323 2019-06-05 10:24:36 +02:00
ath79.dtsi ath79: dts: drop "simple-mfd" for gmacs in SoC dtsi 2019-06-05 10:12:31 +02:00
qca953x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
qca953x_tplink_tl-wr810n.dtsi ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca956x.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
qca9531_comfast_cf-e5.dts ath79: add support for COMFAST CF-E5/E7 2019-03-24 01:44:27 +01:00
qca9531_engenius_ews511ap.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_glinet_gl-ar300m-lite.dts ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m-nand.dts ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m-nor.dts ath79: Add GL.iNet AR-300M-Lite 2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m.dtsi ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_glinet_gl-x750.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9531_tplink_archer-d50-v1.dts ath79: add support for TP-Link Archer D50 V1 2019-05-18 17:59:49 +02:00
qca9531_tplink_tl-wr810n-v1.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9531_yuncore_a770.dts ath79: fix SOC version in compat string for A770 2019-07-31 08:38:06 +02:00
qca9533_comfast_cf-e110n-v2.dts ath79: add support for COMFAST CF-E110N 2018-12-31 16:25:11 +01:00
qca9533_tplink_cpe210-v2.dts ath79: fix vendor capitalization of TP-Link 2019-08-07 18:04:03 +02:00
qca9533_tplink_cpe210-v3.dts ath79: fix vendor capitalization of TP-Link 2019-08-07 18:04:03 +02:00
qca9533_tplink_cpe210.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9533_tplink_tl-wr810n-v2.dts ath79: Add support for TP-Link WR810N 2018-12-31 14:18:19 +01:00
qca9533_tplink_tl-wr841-v9.dts ath79: add support for TP-Link TL-WR841N/ND v10 2019-08-05 10:54:11 +02:00
qca9533_tplink_tl-wr841-v10.dts ath79: add support for TP-Link TL-WR841N/ND v10 2019-08-05 10:54:11 +02:00
qca9533_tplink_tl-wr841-v11.dts ath79: add support for TP-Link TL-WR841N/ND v12 2019-08-05 10:54:11 +02:00
qca9533_tplink_tl-wr841-v11.dtsi ath79: add support for TP-Link TL-WR841N/ND v12 2019-08-05 10:54:11 +02:00
qca9533_tplink_tl-wr841-v12.dts ath79: add support for TP-Link TL-WR841N/ND v12 2019-08-05 10:54:11 +02:00
qca9533_tplink_tl-wr841.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9533_tplink_tl-wr842n-v3.dts ath79: fix indent in TP-Link TL-WR842N v3 DTS file 2019-07-30 00:34:39 +02:00
qca9533_ubnt_acb-isp.dts ath79: add support for Ubiquiti airCube ISP 2019-04-08 18:37:04 +02:00
qca9557.dtsi ath79: ar93xx/qca95xx: move gmac/wmac/pcie node out of apb bus 2019-07-16 09:52:43 +08:00
qca9557_buffalo_bhr-4grv2.dts ath79: dts: Unify naming of gpio-led nodes 2019-01-26 21:09:12 +01:00
qca9557_iodata_wn-ac-dgr.dtsi ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1167dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr.dts ath79: add support for I-O DATA WN-AC1600DGR 2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr2.dts ath79: modify device name of I-O DATA WN-AC1600DGR2 2019-07-18 00:06:55 +02:00
qca9558_devolo_dvl1xxx.dtsi ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1200e.dts ath79: add support for devolo WiFi pro 1200e 2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200i.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1750c.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1750e.dts ath79: add support for Devolo WiFi Pro 1750e 2019-01-26 21:46:33 +01:00
qca9558_devolo_dvl1750i.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_devolo_dvl1750x.dts ath79: add support for devolo WiFi pro 1750x 2019-07-14 16:20:53 +02:00
qca9558_engenius_ecb1750.dts ath79: ecb1750: additional dts fixes 2019-05-27 22:44:08 +02:00
qca9558_engenius_epg5000.dts ath79: fix leds description for EnGenius EPG5000 2019-03-18 20:42:29 +01:00
qca9558_librerouter_librerouter-v1.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9558_netgear_ex6400.dts ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
qca9558_netgear_ex7300.dts ath79: add support for Netgear EX6400 and EX7300 2019-04-09 11:09:26 +02:00
qca9558_netgear_ex7300.dtsi ath79: remove lines-initial-states property 2019-07-25 17:27:57 +02:00
qca9558_ocedo_koala.dts ath79: correct various phy-mode properties 2019-06-20 08:57:36 +02:00
qca9558_ocedo_ursus.dts ath79: add support for OCEDO Ursus 2019-04-08 18:37:04 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9558_tplink_archer-c5-v1.dts ath79: add support for TP-Link Archer C5 v1 2019-02-28 11:32:55 +01:00
qca9558_tplink_archer-c7-v1.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7-v2.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_re350k-v1.dts ath79: add support for TP-Link RE350K v1 2019-03-11 22:00:26 +01:00
qca9558_tplink_re355-v1.dts ath79: add support for TP-Link RE355 v1 and RE450 v1 2019-07-17 23:14:23 +02:00
qca9558_tplink_re450-v1.dts ath79: add support for TP-Link RE355 v1 and RE450 v1 2019-07-17 23:14:23 +02:00
qca9558_tplink_rex5x.dtsi ath79: add support for TP-Link RE355 v1 and RE450 v1 2019-07-17 23:14:23 +02:00
qca9558_tplink_tl-wdr4900-v2.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wr941n-v7-cn.dts ath79: add support for TP-Link TL-WR941N v7 (CN) 2019-03-24 01:44:27 +01:00
qca9558_tplink_tl-wr1043nd-v2.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd-v3.dts ath79: make TP-Link revision naming consistent 2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd.dtsi treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9558_trendnet_tew-823dru.dts ath79: add support for Trendnet TEW-823DRU 2019-07-18 00:06:55 +02:00
qca9561_avm_fritz4020.dts ath79: remove lines-initial-states property 2019-07-25 17:27:57 +02:00
qca9561_tplink_archer-c5x.dtsi ath79: fix "spi-gpio: convert deprecated binding" 2019-06-25 14:50:08 +02:00
qca9561_tplink_archer-c6x.dtsi ath79: Add support for TP-Link Archer C60 v1 2019-07-18 00:06:55 +02:00
qca9561_tplink_archer-c25-v1.dts ath79: Remove redundant LED GPIO definitions for Archer C25 v1 2019-06-24 20:22:23 +02:00
qca9561_tplink_archer-c58-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c59-v1.dts ath79: rename TP-LINK to TP-Link 2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c60-v1.dts ath79: Add support for TP-Link Archer C60 v1 2019-07-18 00:06:55 +02:00
qca9561_tplink_archer-c60-v2.dts ath79: Add support for TP-Link Archer C60 v2 2019-07-18 00:06:55 +02:00
qca9561_xiaomi_mi-router-4q.dts ath79: add support for Xiaomi Mi Router 4Q 2019-02-11 19:04:06 +01:00
qca9563_dlink_dir-842-c.dtsi ath79: add support for D-Link DIR-842 C1 2019-08-05 10:54:11 +02:00
qca9563_dlink_dir-842-c1.dts ath79: add support for D-Link DIR-842 C1 2019-08-05 10:54:11 +02:00
qca9563_dlink_dir-842-c2.dts ath79: add support for D-Link DIR-842 C1 2019-08-05 10:54:11 +02:00
qca9563_dlink_dir-842-c3.dts ath79: add support for D-Link DIR-842 C3 2019-08-07 21:17:40 +02:00
qca9563_dlink_dir-859-a1.dts ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_elecom_wrc-300ghbk2-i.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_elecom_wrc-1750ghbk2-i.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_elecom_wrc-ghbk2-i.dtsi ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_glinet_gl-ar750s.dts ath79: glinet_gl-ar750s: Add USB power & microSD 2019-05-20 21:25:00 +02:00
qca9563_nec_wg800hp.dts ath79: add support for NEC Aterm WG800HP 2018-12-24 19:18:07 +01:00
qca9563_nec_wg1200cr.dts ath79: add support for NEC Aterm WG1200CR 2019-04-06 19:14:06 +02:00
qca9563_phicomm_k2t.dts treewide: dts: Remove default-state=off property from all gpio LED nodes 2018-12-17 08:16:28 +01:00
qca9563_rosinson_wr818.dts ath79: use the qca,qca9563 chip compatible for the WR818 2019-05-18 17:59:49 +02:00
qca9563_tplink_archer-a7-v5.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9563_tplink_archer-c2-v3.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_tplink_archer-c6-v2.dts ath79: add support for TP-Link Archer C6 v2 2018-12-31 16:25:11 +01:00
qca9563_tplink_archer-c7-v4.dts ath79: fix "spi-gpio: convert deprecated binding" 2019-06-25 14:50:08 +02:00
qca9563_tplink_archer-c7-v5.dts ath79: Add missing read-only properties 2019-05-11 16:37:11 +02:00
qca9563_tplink_archer-x6-v2.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_archer-x7-v5.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_re450-v2.dts ath79: Consistently label info partition 2019-06-10 11:25:41 +02:00
qca9563_tplink_tl-wr1043n-v5.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_tplink_tl-wr1043n.dtsi ath79: set mib-poll-interval on mdio0 attached ar83xx switch 2019-05-20 21:19:48 +02:00
qca9563_tplink_tl-wr1043nd-v4.dts ath79: Consistently label art partition with lower case 2019-06-10 11:25:41 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: Fix UBNT Unifi AC LEDs 2018-12-31 13:28:31 +01:00
tp9343_tplink_tl-wr94x.dtsi ath79: add support for TP9343-based TP-Link TL-WR94x devices 2019-08-05 21:50:15 +02:00
tp9343_tplink_tl-wr940n-v3.dts ath79: add support for TP9343-based TP-Link TL-WR94x devices 2019-08-05 21:50:15 +02:00
tp9343_tplink_tl-wr940n-v3.dtsi ath79: add support for TP9343-based TP-Link TL-WR94x devices 2019-08-05 21:50:15 +02:00
tp9343_tplink_tl-wr940n-v4.dts ath79: add support for TP9343-based TP-Link TL-WR94x devices 2019-08-05 21:50:15 +02:00
tp9343_tplink_tl-wr941nd-v6.dts ath79: add support for TP9343-based TP-Link TL-WR94x devices 2019-08-05 21:50:15 +02:00