mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-02-21 21:02:23 +01:00
d2beb6bdc4
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Registers must not be accessed in parallel by multiple drivers.
Read-modify-write operations are not atomic, and the result of parallel
access is undefined.
The MAC_L2_GLOBAL_CTRL2 register is essentially a pin configuration
register and is represented by a pinmux node in the devicetree. Operations
on this register by the realtek,rtl838x-eth driver must therefore also be
reflected in the devicetree.
Since the MDIO sets used are board-specific, the pins must be enabled in
the board’s devicetree. This can be achieved using the pinctrl properties
for the realtek,rtl83xx-switch.
&switch0 {
pinctrl-names = "default";
pinctrl-0 = <&pinmux_enable_mdc_mdio_0>,
<&pinmux_enable_mdc_mdio_1>;
....
};
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Link: https://github.com/openwrt/openwrt/pull/19815
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||