mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-14 23:09:45 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions
openwrt/target/linux/mediatek/dts
History
Marius Durbaca e876f7bc62
Some checks failed
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
Build all core packages / Build all core packages for selected target (push) Has been cancelled
Details
Build host tools / Build host tools for linux and macos based systems (push) Has been cancelled
Details
mediatek: add support for Zbtlink ZBT-Z8102AX v2 
Specifications:
SoC: MediaTek MT7981B
RAM: 1024MiB
Flash: SPI-NAND 128 MiB
Switch: 1 WAN, 4 LAN (Gigabit)
USB: two M.2 slots for 5G modems via USB 3.0 hub, external USB 3.0 port
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7976CN
UART: 115200n8
UART Layout:
VCC-RX-TX-GND

Installation:
1. Power down the router and hold in the Reset button.
2. While holding in the button power up the router again.
3. Hold the button in for 10 seconds and then release.
4. Use your browser to go to 192.168.1.1
5. If you see a GUI that is for flashing firmware then you have the V2 model.
	If there is no GUI and the router continues to boot up normally
	you have the V1 model.
6. Now use the V2 sysugrade file.

Note: Recovery GUI it can be used to recover from an incorrect firmware flash.

Based on patches adding support for this device by Yannick Chabanois (openmptcprouter)
and Dairyman (ofmodemsandmen)

Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18514
(cherry picked from commit c908fc7d95)
Link: https://github.com/openwrt/openwrt/pull/19216
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-06-29 15:24:37 +02:00
..
mt7622-buffalo-wsr-2533dhp2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-buffalo-wsr-3200ax4s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-buffalo-wsr.dtsi mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7622-dlink-eagle-pro-ai-ax3200-a1.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-dlink-eagle-pro-ai-m32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-dlink-eagle-pro-ai-r32-a1.dts mediatek: Add support for D-Link EAGLE PRO AI R32 2024-01-02 21:22:46 +01:00
mt7622-elecom-wrc-2533gent.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7622-elecom-wrc-x3200gst3.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-linksys-e8450-ubi.dts mediatek: fix wrong compatible string 2024-10-06 21:56:04 +02:00
mt7622-linksys-e8450.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-linksys-e8450.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-netgear-wax206.dts mediatek-mt7622: netgear-wax206 fix wifi leds 2025-01-24 22:25:43 +01:00
mt7622-reyee-ax3200-e5.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-rfb1-ubi.dts mediatek: re-enable mt7622-rfb1-ubi with changed partition layout 2024-02-28 09:59:43 +01:00
mt7622-ruijie-rg-ew3200.dtsi mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7622-ruijie-rg-ew3200gx-pro.dts mediatek: also move &slot0 from dtsi down to board dts 2022-12-07 01:45:14 +00:00
mt7622-smartrg-SDG-841-t6.dts mediatek: mt7622: add Adtran SmartRG SDG-841t6 device 2024-10-15 17:55:05 +01:00
mt7622-totolink-a8000ru.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7622-ubnt-unifi-6-lr-v1-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v1.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v1.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v2-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v2.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v2.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr-v3-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7622-ubnt-unifi-6-lr-v3.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7622-ubnt-unifi-6-lr-v3.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-ubnt-unifi-6-lr.dtsi mediatek: add support for Ubiquiti UniFi 6 LR v3 2023-08-28 16:35:22 +01:00
mt7622-xiaomi-redmi-router-ax6s.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7623a-unielec-u7623-02-emmc-512m.dts mediatek: u7623-02: enable early console also in legacy image 2022-01-31 00:10:38 +00:00
mt7623a-unielec-u7623-02.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7623a-unielec-u7623-02.dtsi mediatek: u7623: fix network switch enumeration 2025-03-17 16:21:23 +01:00
mt7629-iptime-a6004mx.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7629-linksys-ea7500-v3.dts mediatek: Add support for Linksys EA7500 v3 2024-08-15 00:13:20 +02:00
mt7629-netgear-ex6250-v2.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7629-tplink_eap225-v5.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981a-comfast-cf-e393ax.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981a-edgecore-eap111.dts mediatek: EAP111: add label-mac-device 2024-08-10 18:00:14 +02:00
mt7981a-glinet-gl-x3000-xe3000-common.dtsi mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981a-glinet-gl-x3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-glinet-gl-xe3000.dts mediatek: Add support for GL.iNet X3000 (Spitz AX) and XE3000 (Puli AX) 2024-03-13 20:47:23 +00:00
mt7981a-ubnt-unifi-6-plus.dts mediatek: convert to nvmem-layout 2023-11-25 23:45:26 +01:00
mt7981b-abt-asr3000.dts mediatek: add ABT ASR3000 support 2024-07-21 16:13:06 +02:00
mt7981b-asus-rt-ax52.dts mediatek: filogic: add support for ASUS RT-AX52 2025-05-04 16:36:49 +02:00
mt7981b-cetron-ct3003.dts mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7981b-cmcc-a10-stock.dts mediatek: add support for CMCC A10 2025-03-15 11:48:57 +01:00
mt7981b-cmcc-a10-ubootmod.dts mediatek: add support for CMCC A10 2025-03-15 11:48:57 +01:00
mt7981b-cmcc-a10.dtsi mediatek: add support for CMCC A10 2025-03-15 11:48:57 +01:00
mt7981b-cmcc-rax3000m-emmc.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m-nand.dtso mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-cmcc-rax3000m.dts mediatek: switch to fitblk for cmcc rax3000m 2024-07-18 13:20:58 +01:00
mt7981b-confiabits-mt7981.dts mediatek: drop redundant label with new LED color/function format 2024-02-07 14:48:39 +01:00
mt7981b-cudy-ap3000-v1.dts mediatek: cudy: fixes typo for spi and mtd properties 2025-01-24 22:42:39 +01:00
mt7981b-cudy-ap3000outdoor-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-24 22:43:13 +01:00
mt7981b-cudy-m3000-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-24 22:43:13 +01:00
mt7981b-cudy-re3000-v1.dts mediatek: filogic: add support for Cudy RE3000 v1 2024-02-29 21:16:27 +01:00
mt7981b-cudy-tr3000-v1.dts mediatek: cleanup device tree for cudy devices 2025-01-24 22:43:13 +01:00
mt7981b-cudy-wr3000-nand.dtsi mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-17 23:06:01 +02:00
mt7981b-cudy-wr3000-v1.dts mediatek: filogic: prevent faulty mac address assignment 2024-12-10 01:06:10 +01:00
mt7981b-cudy-wr3000e-v1.dts mediatek: filogic: add support for Cudy WR3000E v1 2025-06-17 23:32:18 +02:00
mt7981b-cudy-wr3000h-v1.dts mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-17 23:06:01 +02:00
mt7981b-cudy-wr3000s-v1.dts mediatek: Create common DTSI for WR3000H and WR3000S 2025-06-17 23:06:01 +02:00
mt7981b-dlink-aquila-pro-ai-m30-a1.dts filogic: Add support for D-Link AQUILA PRO AI M30 2024-03-31 19:01:20 +02:00
mt7981b-gatonetworks-gdsp.dts mediatek: filogic: add support for GatoNetworks GDSP 2024-11-28 18:47:13 +00:00
mt7981b-glinet-gl-mt2500.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981b-glinet-gl-mt3000.dts treewide: gpio to gpios 2024-06-17 12:57:06 +02:00
mt7981b-h3c-magic-nx30-pro.dts mediatek: filogic: convert H3C Magic NX30 Pro to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-huasifei-wh3000.dts mediatek: filogic: add support for Huasifei WH3000 2025-04-10 20:29:37 +02:00
mt7981b-jcg-q30-pro.dts mediatek: filogic: convert JCG Q30 PRO to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-keenetic-kn-3811.dts mediatek/filogic: add Keenetic KN-3811 support 2025-02-26 23:32:40 +01:00
mt7981b-keenetic-kn-3911.dts mediatek/filogic: add Keenetic KN-3911 support 2025-02-26 23:32:40 +01:00
mt7981b-mercusys-mr80x-v3.dts mediatek: filogic: fix mistaken executable bit on dts file 2025-05-07 20:58:33 +02:00
mt7981b-netis-nx31.dts mediatek: add support for netis NX31 2025-04-10 20:18:23 +02:00
mt7981b-nokia-ea0326gmp.dts mediatek: fix wps button for nokia ea0326gmp 2024-06-07 14:19:39 +02:00
mt7981b-openembed-som7981.dts mediatek: update openembed som7981 support 2024-12-26 14:13:35 +01:00
mt7981b-openwrt-one.dts mediatek: set mac increment to 7 for the 5G radio on OpenWrt One 2024-11-05 13:30:21 +01:00
mt7981b-qihoo-360t7.dts mediatek: filogic: convert Qihoo 360T7 to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-routerich-ax3000-common.dtsi mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-28 18:49:33 +00:00
mt7981b-routerich-ax3000-ubootmod.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-28 18:49:33 +00:00
mt7981b-routerich-ax3000-v1.dts mediatek: add support for Routerich AX3000 v1 2025-05-08 20:35:36 +02:00
mt7981b-routerich-ax3000.dts mediatek: Routerich AX3000: add OpenWrt U-Boot layout 2024-11-28 18:49:33 +00:00
mt7981b-unielec-u7981-01-emmc.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7981b-unielec-u7981-01-nand.dts mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-unielec-u7981-01.dtsi mediatek: filogic: add Unielec U7981-01 support 2024-03-25 18:14:19 +00:00
mt7981b-wavlink-wl-wn573hx3.dts mediatek: filogic: add support for WAVLINK WL-WN573HX3 2025-05-07 21:03:31 +02:00
mt7981b-wavlink-wl-wn586x3.dts mediatek: filogic: Add support for Wavlink WL-WN586X3 2024-06-09 14:58:25 +02:00
mt7981b-xiaomi-mi-router-ax3000t-ubootmod.dts mediatek: filogic: convert Xiaomi AX3000T to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dts mediatek: fix nmbm configuration mismatch (Xiaomi AX3000t) 2025-02-09 23:19:11 +01:00
mt7981b-xiaomi-mi-router-ax3000t.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-xiaomi-mi-router-common.dtsi mediatek: Xiaomi AX3000t: enable SPI calibration 2025-03-17 16:14:27 +01:00
mt7981b-xiaomi-mi-router-wr30u-stock.dts mediatek: filogic: add support for Xiaomi WR30U 2023-07-27 13:46:16 +02:00
mt7981b-xiaomi-mi-router-wr30u-ubootmod.dts mediatek: filogic: convert Xiaomi WR30U to fitblk 2024-08-28 15:11:51 +01:00
mt7981b-xiaomi-mi-router-wr30u.dtsi mediatek: filogic: add support for Xiaomi AX3000T 2024-01-06 17:51:11 +01:00
mt7981b-yuncore-ax835.dts mediatek: YunCore AX835: fix voltage regulator 2024-11-04 10:36:11 +01:00
mt7981b-zbtlink-zbt-z8102ax-v2.dts mediatek: add support for Zbtlink ZBT-Z8102AX v2 2025-06-29 15:24:37 +02:00
mt7981b-zbtlink-zbt-z8102ax.dts mediatek: correct address of MT753x switch IC 2024-04-24 21:05:46 +01:00
mt7981b-zbtlink-zbt-z8103ax.dts mediatek: add support for Zbtlink ZBT-Z8103AX 2023-12-26 00:02:19 +01:00
mt7981b-zyxel-nwa50ax-pro.dts treewide: rename ZyXEL to Zyxel 2024-08-25 15:08:25 +02:00
mt7986a-acelink-ew-7886cax.dts mediatek: filogic: add Acelink EW-7886CAX support 2023-12-05 09:06:47 +01:00
mt7986a-acer-predator-w6.dts mediatek: improve device tree for Acer Predator Connect W6 2024-11-28 18:49:11 +00:00
mt7986a-acer-predator-w6d.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-28 18:49:13 +00:00
mt7986a-acer-vero-w6m.dts mediatek: add support for Acer Predator W6d and Acer Vero W6m 2024-11-28 18:49:13 +00:00
mt7986a-acer-w6-common.dtsi mediatek: improve device tree for Acer Predator Connect W6 2024-11-28 18:49:11 +00:00
mt7986a-asus-rt-ax59u.dts mediatek: apply bootloader work-around for affected ASUS devices 2025-02-16 20:43:53 +00:00
mt7986a-asus-tuf-ax4200.dts mediatek: apply bootloader work-around for affected ASUS devices 2025-02-16 20:43:53 +00:00
mt7986a-asus-tuf-ax6000.dts mediatek: apply bootloader work-around for affected ASUS devices 2025-02-16 20:43:53 +00:00
mt7986a-bananapi-bpi-r3-mini.dts mediatek: filogic: bpi-r3-mini: fix power on M.2 slot 2024-02-16 13:56:01 +00:00
mt7986a-dlink-aquila-pro-ai-m60-a1.dts mediatek: Fix primary MAC of D-Link M60 2025-01-01 22:43:26 +01:00
mt7986a-glinet-gl-mt6000.dts mediatek: fix u-boot env layout NVMEM definitions 2024-08-01 17:31:23 +02:00
mt7986a-jdcloud-re-cp-03.dts mediatek: increase phy assert time for jdcloud re-cp-03 2024-08-08 20:00:12 +02:00
mt7986a-netcore-n60.dts mediatek: filogic: convert Netcore N60 to fitblk 2024-08-28 15:11:51 +01:00
mt7986a-ruijie-rg-x60-pro.dts mediatek: add support for Ruijie RG-X60 Pro 2024-06-05 17:44:11 +01:00
mt7986a-smartrg-bonanza-peak.dtsi mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00
mt7986a-smartrg-SDG-8612.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8614.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8622.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-smartrg-SDG-8632.dts mediatek: add support for Adtran SmartRG Bonanza Peak series 2023-12-10 06:22:51 +00:00
mt7986a-tplink-archer-ax80-v1.dts mediatek: add support for TP-Link Archer AX80v1(US/RU/CA) 2025-06-08 21:07:36 +02:00
mt7986a-tplink-tl-xdr-common.dtsi mediatek: filogic: switch TP-LINK XDR series to fitblk 2024-04-09 15:07:41 +01:00
mt7986a-tplink-tl-xdr4288.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6086.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xdr6088.dts mediatek: sync MT7986 device trees with upstream 2023-06-05 11:36:32 +01:00
mt7986a-tplink-tl-xtr8488.dts mediatek: add support for TP-Link TL-XTR8488 2024-07-25 22:54:16 +02:00
mt7986a-xiaomi-redmi-router-ax6000-stock.dts mediatek: add new layout for Xiaomi Redmi Router AX6000 for OpenWrt U-Boot 2022-12-29 03:00:31 +00:00
mt7986a-xiaomi-redmi-router-ax6000-ubootmod.dts mediatek: wait for fitblk rootfs 2024-03-09 14:02:58 +00:00
mt7986a-xiaomi-redmi-router-ax6000.dtsi mediatek: clean duplicated #include in Xiaomi Redmi AX6000's dts 2024-03-08 16:51:35 +08:00
mt7986a-zyxel-ex5601-t0-common.dtsi mediatek: convert to new LED color/function format where possible 2024-02-07 14:48:39 +01:00
mt7986a-zyxel-ex5601-t0-stock.dts mediatek: filogic: fix mt7986a-zyxel-ex5601-t0-stock.dts model name and eth1 wan definition 2025-02-13 00:32:30 +01:00
mt7986a-zyxel-ex5601-t0-ubootmod.dts mediatek: filogic: convert Zyxel EX5601-T0 to fitblk 2024-08-28 15:11:51 +01:00
mt7986a-zyxel-ex5700-telenor.dts filogic: add missing 2.5G PHY LEDs configuration for Zyxel EX5700 2024-09-06 22:17:45 +02:00
mt7986b-mercusys-mr90x-v1-common.dtsi mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-12-10 01:08:03 +01:00
mt7986b-mercusys-mr90x-v1-ubi.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-12-10 01:08:03 +01:00
mt7986b-mercusys-mr90x-v1.dts mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-12-10 01:08:03 +01:00
mt7986b-netgear-wax220.dts mediatek-filogic: fix wax220 wifi leds 2025-01-20 22:00:24 +01:00
mt7986b-tplink-re6000xd.dts mediatek: filogic: add support for TP-LINK RE6000XD 2024-07-04 22:14:32 +02:00
mt7988a-arcadyan-mozart.dts mediatek: filogic: add Arcadyan Mozart platform 2024-11-05 13:30:21 +01:00
mt7988a-smartrg-mt-stuart.dtsi mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00
mt7988a-smartrg-SDG-8733.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988a-smartrg-SDG-8734.dts mediatek: filogic: add Adtran SmartRG Mount Stuart series 2024-05-24 18:34:13 +01:00
mt7988d-smartrg-SDG-8733A.dts mediatek: use NVMEM framework on all Adtran devices 2024-10-15 17:56:06 +01:00