openwrt/target
Tianling Shen cc6c3a6ee8 mediatek: add support for OpenEmbed SOM7981
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 256 MiB SPI-NAND, 32 GB eMMC optional
  RAM: 0.5/1 GB DDR4
  Ethernet: 1x 1GbE, 1x 2.5GbE (RTL8221B)
  WiFi: MediaTek MT7976C
  USB: 1x USB 3.0
  GPIO: 26-Pin header
  UART: 6 GND, 8 TX, 10 RX (in Pin header)
  Button: Reset, WPS
  Power: Type-C PD

Installation:
The board comes with a third-party custom OpenWrt image, you can upload
sysupgrade image via LuCI directly WITHOUT keeping configurations.

Or power on the board with pressing reset button for 5 second, then visit
http://192.168.1.1 and upload -factory.bin firmware.

Signed-off-by: Tianling Shen <cnsztl@gmail.com>
2024-03-31 20:20:59 +02:00
..
imagebuilder imagebuilder: add check if target is sourced from feed 2024-03-29 20:00:27 +01:00
linux mediatek: add support for OpenEmbed SOM7981 2024-03-31 20:20:59 +02:00
llvm-bpf
sdk tools: add ledumon and ledhwbmon packages 2023-12-12 19:35:03 +01:00
toolchain treewide: add ORIG_PATH variable 2023-06-05 08:31:47 +02:00
Config.in generic: groundwork for RISC-V 2023-05-28 13:19:10 +02:00
Makefile build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies 2024-03-03 23:13:59 +01:00