openwrt/target/linux
Rafał Miłecki cc51d97200 bcm4908: enable Netgear R8000P bootloader image
This enables building BCM4908 "raw" image that can be flashed using
bootloader web UI. It requires serial console access & stopping booting
by the "Press any key to stop auto run".

It's easy to build vendor like CHK image but it can't be safely flashed
using vendor UI at this point. Netgear implements method called "NAND
incremental flashing" that doesn't seem to flash bootfs partition as
provided.

Above method seems to update vmlinux.lz without updating 94908.dtb. It
prevents OpenWrt kernel from booting due to incomplete DTB file. Full
Netgear R8000P support can be enabled after finding a way to make vendor
firmware flash OpenWrt firmware including the 94908.dtb update.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
(cherry picked from commit d92a9c97bf)
2021-04-08 13:16:14 +02:00
..
apm821xx kernel: bump 5.4 to 5.4.108 2021-03-27 16:26:56 +01:00
arc770 target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
archs38 archs38: Add CONFIG_HZ=100 2021-03-19 18:01:55 +01:00
armvirt target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
at91 at91: use SPDX license identifiers on DTS files 2021-02-10 15:47:23 +01:00
ath25 target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
ath79 kernel: backport 5.13 mtd partitioning changes 2021-04-08 11:25:41 +02:00
bcm27xx kernel: bump 5.4 to 5.4.108 2021-03-27 16:26:56 +01:00
bcm47xx bcm47xx: make WGT634U NVRAM patch apply again 2021-03-17 23:38:46 +01:00
bcm53xx bcm53xx: enhance support for Linksys EA9500 2021-04-08 12:49:01 +02:00
bcm63xx bcm63xx: AD1018-nor: add NAND flash 2021-03-08 12:46:46 +01:00
bcm4908 bcm4908: enable Netgear R8000P bootloader image 2021-04-08 13:16:14 +02:00
gemini target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
generic kernel: create bootfs partition when parsing on BCM4908 2021-04-08 13:16:10 +02:00
imx6 Revert "imx6: bootscript-apalis: make it working on v2021.01 release" 2021-02-14 23:28:07 +01:00
ipq40xx ipq40xx: net: phy: qca807x: fix GPIO driver 2021-03-29 22:26:27 +02:00
ipq806x kernel: backport 5.13 mtd partitioning changes 2021-04-08 11:25:41 +02:00
kirkwood kernel: backport 5.13 mtd partitioning changes 2021-04-08 11:25:41 +02:00
lantiq kernel: backport 5.13 mtd partitioning changes 2021-04-08 11:25:41 +02:00
layerscape kernel: bump 5.4 to 5.4.108 2021-03-27 16:26:56 +01:00
malta target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
mediatek kernel: bump 5.4 to 5.4.108 2021-03-27 16:26:56 +01:00
mpc85xx mpc85xx: p2020: fix cfi-nor detection 2021-03-01 21:49:55 +01:00
mvebu kernel: backport 5.13 mtd partitioning changes 2021-04-08 11:25:41 +02:00
mxs target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
octeon octeon: re-enable CONFIG_CAVIUM_CN63XXP1 and EdgeRouter image 2021-02-28 21:56:39 +01:00
octeontx kernel: bump 5.4 to 5.4.105 2021-03-16 00:31:16 +01:00
omap target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
oxnas target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
pistachio kernel: add pending mtd patches adding NVMEM support 2021-03-17 21:24:22 +01:00
ramips ramips: correct switch config of Youku yk1 2021-04-02 16:04:00 +02:00
realtek kernel: bump 5.4 to 5.4.102 2021-03-06 15:51:54 +01:00
rockchip kernel: Deactivate CONFIG_VFIO in generic kernel config 2021-03-27 16:26:56 +01:00
sunxi kernel: bump 5.4 to 5.4.102 2021-03-06 15:51:54 +01:00
tegra kernel: Deactivate CONFIG_VFIO in generic kernel config 2021-03-27 16:26:56 +01:00
uml target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
x86 kernel: bump 5.4 to 5.4.105 2021-03-16 00:31:16 +01:00
zynq target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
Makefile target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00