mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-03-12 00:48:21 +01:00
c8c187f0f0
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
ZyXEL XGS1250-12 Rev.B1 has RTL8218E compared to RTL8218D in Rev.A1 but both of them seem very similar and pin compatible. Therefore they can share the same phy_driver callbacks. PHY identifier is set based on the datasheet from https://github.com/plappermaul/realtek-doc/blob/main/RTL8218E-CG_Datasheet.pdf Before: [ 2.120161] rtl83xx-switch switch@1b000000 lan1 (uninitialized): PHY [mdio-bus:00] driver [Generic PHY] (irq=POLL) [ 2.134581] rtl83xx-switch switch@1b000000 lan2 (uninitialized): PHY [mdio-bus:01] driver [Generic PHY] (irq=POLL) [ 2.149043] rtl83xx-switch switch@1b000000 lan3 (uninitialized): PHY [mdio-bus:02] driver [Generic PHY] (irq=POLL) [ 2.163498] rtl83xx-switch switch@1b000000 lan4 (uninitialized): PHY [mdio-bus:03] driver [Generic PHY] (irq=POLL) [ 2.177963] rtl83xx-switch switch@1b000000 lan5 (uninitialized): PHY [mdio-bus:04] driver [Generic PHY] (irq=POLL) [ 2.192435] rtl83xx-switch switch@1b000000 lan6 (uninitialized): PHY [mdio-bus:05] driver [Generic PHY] (irq=POLL) [ 2.207009] rtl83xx-switch switch@1b000000 lan7 (uninitialized): PHY [mdio-bus:06] driver [Generic PHY] (irq=POLL) [ 2.221474] rtl83xx-switch switch@1b000000 lan8 (uninitialized): PHY [mdio-bus:07] driver [Generic PHY] (irq=POLL) After: [ 2.119165] rtl83xx-switch switch@1b000000 lan1 (uninitialized): PHY [mdio-bus:00] driver [REALTEK RTL8218E] (irq=POLL) [ 2.132880] rtl83xx-switch switch@1b000000 lan2 (uninitialized): PHY [mdio-bus:01] driver [REALTEK RTL8218E] (irq=POLL) [ 2.146727] rtl83xx-switch switch@1b000000 lan3 (uninitialized): PHY [mdio-bus:02] driver [REALTEK RTL8218E] (irq=POLL) [ 2.160580] rtl83xx-switch switch@1b000000 lan4 (uninitialized): PHY [mdio-bus:03] driver [REALTEK RTL8218E] (irq=POLL) [ 2.174367] rtl83xx-switch switch@1b000000 lan5 (uninitialized): PHY [mdio-bus:04] driver [REALTEK RTL8218E] (irq=POLL) [ 2.188270] rtl83xx-switch switch@1b000000 lan6 (uninitialized): PHY [mdio-bus:05] driver [REALTEK RTL8218E] (irq=POLL) [ 2.202140] rtl83xx-switch switch@1b000000 lan7 (uninitialized): PHY [mdio-bus:06] driver [REALTEK RTL8218E] (irq=POLL) [ 2.216047] rtl83xx-switch switch@1b000000 lan8 (uninitialized): PHY [mdio-bus:07] driver [REALTEK RTL8218E] (irq=POLL) Based-on-patch-by: Antanas Bruzas <antanas.bruzas@protonmail.com> Signed-off-by: Thomas Martitz <thomas.martitz@mailbox.org> Link: https://github.com/openwrt/openwrt/pull/20068 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| base-files | ||
| dts | ||
| files/firmware/rtl838x_phy | ||
| files-6.12 | ||
| image | ||
| patches-6.12 | ||
| profiles | ||
| rtl838x | ||
| rtl839x | ||
| rtl930x | ||
| rtl930x_nand | ||
| rtl931x | ||
| rtl931x_nand | ||
| Makefile | ||