Sander Vanheule c88124cfc4 realtek: netgear-gigabit: Enable RTL8231 ... Since the move to 5.10, there are now two GPIO drivers. The gpio0 node refers to the internal GPIOs, so the indirect-access-bus-id is no longer relevant for that node. Set indirect-access-bus-id to the correct value (31) on the correct node (gpio1) and enable the device. Cc: Raylynn Knight <rayknight@me.com> Cc: Michael Mohr <akihana@gmail.com> Cc: Stijn Segers <foss@volatilesystems.org> Cc: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Sander Vanheule <sander@svanheule.net> Tested-by: Bjørn Mork <bjorn@mork.no>		2021-12-27 13:51:41 +01:00
..
base-files	realtek: sort the port list numerically	2021-12-05 18:49:14 +01:00
dts-5.4	realtek: copy dts directory for Kernel 5.10	2021-09-26 00:32:17 +02:00
dts-5.10	realtek: netgear-gigabit: Enable RTL8231	2021-12-27 13:51:41 +01:00
files/firmware/rtl838x_phy	realtek: update the tree to the latest refactored version	2020-11-26 13:29:27 +01:00
files-5.4	realtek: ensure output drivers are enabled in RTL8231	2021-10-02 21:26:12 +02:00
files-5.10	realtek: Remove _machine_restart and _machine_halt	2021-11-24 21:43:56 +02:00
generic	realtek: update the tree to the latest refactored version	2020-11-26 13:29:27 +01:00
image	realtek: fix ZyXEL initramfs image generation	2021-10-30 15:00:22 +02:00
patches-5.4	kernel: bump 5.4 to 5.4.162	2021-11-28 16:32:45 +01:00
patches-5.10	kernel: bump 5.10 to 5.10.85	2021-12-17 15:10:22 +01:00
profiles	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
config-5.4	treewide: switch the timer frequency to 100 Hz	2021-04-21 10:31:10 +01:00
config-5.10	kernel: 5.10: consolidate mac80211 crypto options	2021-12-17 16:16:34 +01:00
Makefile	realtek: switch to kernel 5.10	2021-10-20 23:27:52 +02:00