mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-05 01:50:36 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 6
openwrt/target/linux/realtek/dts
History
Andrew LaMarche ed7d62caf2
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
Build all core packages / Build all core packages for selected target (push) Waiting to run
Details
realtek: add support for Hasivo S1100W-8XGT-SE switch 
This commit adds support for Hasivo S1100W-8XGT-SE switch.

Device specification
--------------------
SoC Type:	RTL9303
RAM:		Samsung K4B461646E-BYKO (512MB)
Flash:		Fudan FM25Q128A (16 MB)
Ethernet:	8x 10G via 2x RTL8264 PHY
LEDs:		2 LEDs, 1 power green, 1 system green
Button:		Reset
USB ports:	None
Bootloader:	Realtek U-Boot - U-Boot 2011.12.(3.6.6.55087) (Nov 13 2022 - 14:37:31)
Fan:            2 fans controlled by STC8G1K08 TSOP-20 microcontroller

Note: The fan appears to operate the same irrespective of the running
firmware. The STC9G1K08 is likely operating independently.

To explore the stock vendor firmware, there are 2 avenues to gain root
access. This is not necessary to install OpenWrt, but is here for
reference.

Root access via serial
----------------------
1. ctrl+t
2. password: switchrtk
3. press 's' for shell

Root access via SSH
-------------------
1. ctrl+t
2. password: switchrtk
3. sys command sh
4. log in with your username+password
5. ctrl+t
6. password: switchrtk
7. press 's' for shell

Credit to https://forum.openwrt.org/t/hasivo-switches/151758/174 for rooting instructions.

Installing OpenWrt
------------------
1. Connect to UART. UART requires soldering an RJ45 connector to the
   console footprint on the board. The header is on the top right of
   this image: 4d2ab97fad.jpeg
2. Set computer IP to 192.168.0.111.
3. Enter bootloader by pressing esc key during boot.
4. Enter password 'Hs2021cfgmg'.
5. Type 'XXXX'.
6. setenv bootcmd 'rtk network on; bootm 0xb4300000'
7. saveenv
8. rtk network on
9. tftpboot 0x84f00000 <openwrt-initramfs>
10. bootm 0x84f00000

Now you can copy over the sysupgrade image and install.

Credit to
https://forum.openwrt.org/t/hasivo-switches/151758/22?u=andrewjlamarche
for u-boot console access instructions.

Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17137
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-07-27 18:50:03 +02:00
..
rtl83xx_d-link_dgs-1210_common.dtsi realtek: Drop unused property on DGS-1210 gpio0 2025-01-28 07:30:32 +01:00
rtl83xx_d-link_dgs-1210_gpio.dtsi realtek: switch RTL8231 driver for D-Link DGS-1210 2025-01-28 07:30:33 +01:00
rtl83xx_d-link_dgs-1210_gpio_sfp.dtsi realtek: add full SFP support to D-Link DGS-1210-28 series 2024-09-15 16:40:40 +02:00
rtl83xx_hpe_1920.dtsi realtek: add support for HPE 1920-48G (JG927A) and 1920-48G-PoE (JG928A) 2024-09-17 21:44:34 +02:00
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl838x.dtsi realtek: add dts helper for internal phy with serdes 2025-06-22 16:37:32 +02:00
rtl839x.dtsi realtek: add dts helper for internal phy with serdes 2025-06-22 16:37:32 +02:00
rtl930x.dtsi realtek: add dts helper for internal phy with serdes 2025-06-22 16:37:32 +02:00
rtl931x.dtsi realtek: Use Otto timer on RTL931x 2025-06-22 23:12:02 +02:00
rtl8380_d-link_dgs-1210-10mp-f.dts realtek: make use of serdes helper for D-Link DGS-1210-10MP 2025-06-22 16:37:32 +02:00
rtl8380_engenius_ews2910p-v1.dts realtek: engenius_ews2910p: support multiple hardware versions 2025-05-31 23:19:01 +02:00
rtl8380_engenius_ews2910p-v3.dts realtek: support EnGenius EWS2910P v3 2025-05-31 23:19:01 +02:00
rtl8380_engenius_ews2910p.dtsi realtek: make use of serdes helper for Engenius EWS2910P 2025-06-22 16:37:32 +02:00
rtl8380_hpe_1920-8g-poe-65w.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8380_hpe_1920-8g-poe-180w.dts realtek: HPE 1920 8G PoE+ 180W move fans to hwmon 2025-01-15 08:21:08 +01:00
rtl8380_hpe_1920-8g.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8380_hpe_1920-8g.dtsi realtek: make use of serdes helper for HPE 1920 8G 2025-06-22 16:37:33 +02:00
rtl8380_linksys_lgs310c.dts realtek: make use of serdes helper for Linksys LGS310C 2025-06-22 16:37:32 +02:00
rtl8380_netgear_gigabit.dtsi realtek: Simple conversions to RTL8231 MFD driver 2025-01-26 21:46:44 +01:00
rtl8380_netgear_gs108t-v3.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8380_netgear_gs110tpp-v1.dts realtek: add PoE enable line to Netgear GS110TPP 2025-01-28 20:59:04 +01:00
rtl8380_netgear_gs110tup-v1.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8380_netgear_gs308t-v1.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8380_netgear_gs310tp-v1.dts realtek: make use of serdes helper for Netgear GS310TP v1 2025-06-22 16:37:33 +02:00
rtl8380_panasonic_m8eg-pn28080k.dts realtek: make use of serdes helper for Panasonic M8EG PN28080K 2025-06-22 16:37:33 +02:00
rtl8380_tplink_sg2xxx.dtsi realtek: make use of serdes helper for TP-Link SG2xxx 2025-06-22 16:37:33 +02:00
rtl8380_tplink_sg2008p-v1.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8380_tplink_sg2210p-v3.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8380_zyxel_gs1900-8-v1.dts realtek: Split Zyxel GS1900-8 into v1 and v2 2025-01-25 15:07:13 +01:00
rtl8380_zyxel_gs1900-8-v2.dts realtek: Split Zyxel GS1900-8 into v1 and v2 2025-01-25 15:07:13 +01:00
rtl8380_zyxel_gs1900-8hp-v1.dts realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8380_zyxel_gs1900-8hp-v2.dts realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8380_zyxel_gs1900-10hp.dts realtek: make use of serdes helper for Zyxel GS1900-10HP 2025-06-22 16:37:33 +02:00
rtl8380_zyxel_gs1900.dtsi realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8380_zyxel_gs1900_gpio.dtsi realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8380_zyxel_gs1900_gpio_emulated.dtsi realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8382_allnet_all-sg8208m.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_apresia_aplgs120gtss.dts realtek: Switch ApresiaLightGS120GT-SS RTL8231 driver 2025-01-28 20:55:09 +01:00
rtl8382_d-link_dgs-1210-10p.dts realtek: make use of serdes helper for D-Link DGS-1210-10P 2025-06-22 16:37:33 +02:00
rtl8382_d-link_dgs-1210-16.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_d-link_dgs-1210-20.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_d-link_dgs-1210-26.dts realtek: make use of serdes helper for D-Link DGS-1210-26 2025-06-22 16:37:33 +02:00
rtl8382_d-link_dgs-1210-28.dts realtek: add full SFP support to D-Link DGS-1210-28 series 2024-09-15 16:40:40 +02:00
rtl8382_d-link_dgs-1210-28_common.dtsi realtek: add full SFP support to D-Link DGS-1210-28 series 2024-09-15 16:40:40 +02:00
rtl8382_d-link_dgs-1210-28mp-f.dts realtek: d-link: add support for dgs-1210-28p-f 2024-09-24 20:59:50 +02:00
rtl8382_d-link_dgs-1210-28p-f.dts realtek: d-link: add support for dgs-1210-28p-f 2024-09-24 20:59:50 +02:00
rtl8382_d-link_dgs-1210-28p_common.dtsi realtek: d-link: add support for dgs-1210-28p-f 2024-09-24 20:59:50 +02:00
rtl8382_hpe_1920-16g.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_hpe_1920-24g-poe-180w.dts realtek: HPE 1920 24G PoE+ 180W/370W move fans to hwmon 2025-01-16 07:32:16 +01:00
rtl8382_hpe_1920-24g-poe-370w.dts realtek: HPE 1920 24G PoE+ 180W/370W move fans to hwmon 2025-01-16 07:32:16 +01:00
rtl8382_hpe_1920-24g.dts realtek: rtl838x: refactor hpe_1920-24g dts 2024-12-31 08:29:56 +01:00
rtl8382_hpe_1920-24g.dtsi realtek: rtl838x: refactor hpe_1920-24g dts 2024-12-31 08:29:56 +01:00
rtl8382_hpe_1920.dtsi realtek: switch RTL8231 driver for HPE 1920-16/24G 2025-01-12 17:30:23 +01:00
rtl8382_inaba_aml2-17gp.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: Simple conversions to RTL8231 MFD driver 2025-01-26 21:46:44 +01:00
rtl8382_panasonic_m16eg-pn28160k.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_panasonic_m24eg-pn28240k.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_tplink_t1600g-28ts-v3.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8382_zyxel_gs1900-16.dts realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8382_zyxel_gs1900-24-v1.dts realtek: make use of serdes helper for Zyxel GS1900-24(HP) v1/v2 2025-06-22 16:37:33 +02:00
rtl8382_zyxel_gs1900-24e.dts realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8382_zyxel_gs1900-24ep.dts realtek: Move GS1900 external GPIO to new DTSI 2025-01-25 15:06:03 +01:00
rtl8382_zyxel_gs1900-24hp-v1.dts realtek: make use of serdes helper for Zyxel GS1900-24(HP) v1/v2 2025-06-22 16:37:33 +02:00
rtl8382_zyxel_gs1900-24hp-v2.dts realtek: make use of serdes helper for Zyxel GS1900-24(HP) v1/v2 2025-06-22 16:37:33 +02:00
rtl8393_d-link_dgs-1210-52.dts realtek: fix cpu port link type 2025-05-06 10:56:58 +02:00
rtl8393_hpe_1920-48g-poe.dts rtl839x: fix sfp ports on HPE 1920-48G PoE 2025-06-22 11:13:01 +02:00
rtl8393_hpe_1920-48g.dts realtek: switch HP-1920-48G to new shared gpio driver 2025-06-22 11:13:01 +02:00
rtl8393_hpe_1920.dtsi rtl839x: fix sfp ports on HPE 1920-48G PoE 2025-06-22 11:13:01 +02:00
rtl8393_netgear_gs750e.dts realtek: fix cpu port link type 2025-05-06 10:56:58 +02:00
rtl8393_panasonic_m48eg-pn28480k.dts realtek: normalize dts directory 2024-09-14 16:56:37 +02:00
rtl8393_tplink_sg2452p-v4.dts realtek: align port names 2025-06-12 14:12:38 +02:00
rtl8393_zyxel_gs1900-48.dts realtek: align port names 2025-06-12 14:12:38 +02:00
rtl9302_zyxel_xgs1210-12.dts realtek: make use of serdes helper for Zyxel XGS1210-12 2025-06-22 16:37:33 +02:00
rtl9302_zyxel_xgs1250-12.dts realtek: make use of serdes helper for Zyxel XGS1250-12 2025-06-22 16:37:33 +02:00
rtl9303_hasivo_s1100w-8xgt-se.dts realtek: add support for Hasivo S1100W-8XGT-SE switch 2025-07-27 18:50:03 +02:00
rtl9303_tplink_tl-st1008f_v2.dts realtek: make use of serdes helper for TP-Link TL-ST1008F v2.0 2025-06-22 16:37:33 +02:00
rtl9303_xikestor_sks8300-8x.dts realtek: make use of serdes helper for XIKESTOR SKS8300-8X 2025-06-22 16:37:33 +02:00