Luis Mita c6e59d06af ramips: mt7621: add support for Cudy AP1300 Outdoor v1 ... Hardware: - SoC: MediaTek MT7621DAT - Flash: 16 MiB XM25QH128C - RAM: 128 MiB - WLAN: 2.4 GHz (MT7603E, 11n), 5 GHz (MediaTek MT7613BEN, 11ac) - Ethernet: 1x10/100/1000 Mbps LAN - Buttons: 1 Reset button, 1 WPS button - LEDs: 5x Green - Serial Console: unpopulated header 115200 8n1 (silkscreen on PCB) - Power: POE 802.3af (37-57V DC) MAC addresses: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | 80:af:ca:xx:xx:x0 | label | | WLAN 2g | 80:af:ca:xx:xx:x0 | label | | WLAN 5g | 82:af:ca:xx:xx:x1 | +1 | +---------+-------------------+-----------+ Installation: The factory firmware is locked: you can only work with Cudy signed firmware. Download a intermediate firmware signed by Cudy here: https://www.cudy.com/blogs/faq/openwrt-software-download After that, login to the router (192.168.10.254, password "admin") and install the intermediate firmware. If you can reach LuCI or SSH now on the intermediate firmware, just use the sysupgrade image with the 'Keep settings' option turned off. Special thanks to Daniel de Kock for starting the porting work at #16265. Signed-off-by: Luis Mita <luis@luismita.com> Co-Authored-By: Daniel de Kock <daniel@riot.network> Co-Authored-By: Hauke Mehrtens <hauke@hauke-m.de> Link: https://github.com/openwrt/openwrt/pull/20268 (cherry picked from commit 8fb644e9e8) Link: https://github.com/openwrt/openwrt/pull/20710 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2025-11-29 01:20:14 +01:00
..
imagebuilder	imagebuilder: move handling of DEFAULT_PACKAGES into shareable place	2025-01-03 11:14:12 +01:00
linux	ramips: mt7621: add support for Cudy AP1300 Outdoor v1	2025-11-29 01:20:14 +01:00
llvm-bpf
sdk	build: fix building llvm tarball	2025-02-10 22:12:06 +01:00
toolchain
Config.in	loongarch64: new target	2024-05-04 14:14:16 +08:00
Makefile