Chuanhong Guo 5563d49a39 ramips: disable sdhc for HC5661A ... Currently OpenWrt doesn't support switching MT7628 into AP mode (which is done by writing some undocumented registers in MTK SDK) Without doing so, enabling SD breaks 4 FE ports and the SD controller doesn't work since SD pins aren't configured correctly. Disable SDHC on HC5661A to recover the 4 FE ports. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [drop the sdhci node completely] Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-12-06 12:17:25 +01:00
..
base-files	apm821xx, ath79, ipq40xx, ipq806x, lantiq, ramips: base-files: Use generic diag.sh	2018-12-06 08:42:40 +01:00
dts	ramips: disable sdhc for HC5661A	2018-12-06 12:17:25 +01:00
files-4.14/drivers	ramips: mt7620: add force use of mdio-mode	2018-11-26 12:16:52 +01:00
image	ramips: disable sdhc for HC5661A	2018-12-06 12:17:25 +01:00
mt76x8	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
mt7620	ramips: mt7620: select only the matching mt76 driver	2018-12-03 15:34:56 +01:00
mt7621	ramips: refresh mt7621 kernel config	2018-10-15 12:54:12 +02:00
patches-4.14	ralink: fix mt7620 nd_sd pinmux	2018-11-26 15:54:22 +01:00
rt288x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
rt305x	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
rt3883	kernel: only optimized for size if small_flash	2018-07-12 18:15:32 +02:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	ramips: rename pwm kernel module	2018-04-08 12:35:33 +02:00