openwrt/target/linux/mediatek
Donghyun Ko aea6d1bf5e mediatek: filogic: add support for ipTIME AX3000Q
Specification
-------------
- SoC       : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3GHz
- RAM       : DDR3 256Mbytes, ESMT M15T2G16128A
- Flash     : 128Mbytes NAND Flash, ESMT F50L1G41LB
- WLAN      : MediaTek MT7976CN dual-band Wi-Fi 6
  - 2.4GHz  : b/g/n/ax, MU-MIMO
  - 5GHz    : a/n/ac/ax, MU-MIMO
- Ethernet  : MediaTek MT7531AE
  - LAN     : 10/100/1000 Mbps x4
  - WAN     : 10/100/1000 Mbps x1
- UART      : 1x4 pin header on PCB
  - [J6] TX, RX, GND, 3.3V (115200, 8N1)
- Buttons   : WPS, Reset
- LEDs      : 1x CPU (Amber)
              1x Wi-Fi 5GHz (Amber)
              1x Wi-Fi 2.4GHz (Amber)
              1x WAN activity (Amber)
              4x LAN activity (Amber)
- Power     : 12VDC, 1A (Center positive polarity)

MAC address
-----------
+-----------+-------------------+-----------------------+
| Interface | MAC               | Algorithm             |
+-----------+-------------------+-----------------------+
| WLAN 2.4G | B0:38:6C:48:xx:xx | label                 |
| WLAN 5G   | B2:38:6C:48:xx:xx | label with LA Bit Set |
| WAN       | B0:38:6C:48:xx:xx | label + 1             |
| LAN       | B0:38:6C:48:xx:xx | label + 3             |
+-----------+-------------------+-----------------------+
The WLAN 2.4G MAC was found in 'Factory' partition, 0x4

Installation
------------
1. Download the OEM recovery software from the manufacturer's website
2. Download the *squashfs-factory.bin file from the OpenWrt website
3. Press a reset button, and power up the router(keep pressing the reset button)
4. Wait more than 10 seconds until the CPU LED stop blinking
5. Connect the router(LAN port) to the PC
6. Replace a file in the OEM recovery software with the file from step 2
7. Run the OEM recovery software and follow the instructions
8. Wait for the router to boot from *squashfs-factory.bin

Signed-off-by: Donghyun Ko <nyankosoftware@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19368
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2025-07-21 23:52:56 +02:00
..
base-files mediatek: add support for Cudy TR3000 256MB v1 flash version 2025-06-22 19:17:25 +02:00
dts mediatek: filogic: add support for ipTIME AX3000Q 2025-07-21 23:52:56 +02:00
files/drivers mediatek: mt7622: prepare legacy rtl8367c driver for Linux 6.12 2025-05-26 16:58:03 +01:00
files-6.12 kernel/mediatek: 6.12: replace downstream files by patches 2025-05-26 16:58:04 +01:00
filogic mediatek: filogic: add support for ipTIME AX3000Q 2025-07-21 23:52:56 +02:00
image mediatek: filogic: add support for ipTIME AX3000Q 2025-07-21 23:52:56 +02:00
mt7622 mediatek: disable MediaTek SoC Information (mtk-socinfo) driver 2025-07-21 14:27:11 +01:00
mt7623 mediatek: disable MediaTek SoC Information (mtk-socinfo) driver 2025-07-21 14:27:11 +01:00
mt7629 mediatek: remove files, patches and config for Linux 6.6 2025-07-18 12:27:29 +01:00
patches-6.12 target: mediatek: Enable WED for MT7988 devices running 6.12.x kernels 2025-07-18 02:18:15 +01:00
Makefile mediatek: switch to Linux 6.12 by default 2025-07-18 12:26:40 +01:00
modules.mk kernel: kmod-btmtk: Extract btmtk.ko into own package 2025-02-26 23:31:36 +01:00