Michal Cieslakiewicz a736f39432 ath79: add support for Netgear WNDR4500 v3 ... This patch introduces support for Netgear WNDR4500v3. Router is very similar to WNDR4300v2 and is based on the same PCB. Information gathered from various Internet sources (including https://patchwork.ozlabs.org/patch/809227/) shows following differences to WNDR4300v2: * two USB 2.0 ports with separate LEDs * USB LEDs soldered to secondary pads * WPS and RFKILL buttons soldered to secondary pads * described as N900 device with 3x3:3 MIMO for 2.4GHz radio * power supply requirement is DC 12V 2.5A * vendor HW ID suffix differs in one digit * bigger chassis Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>		2020-01-15 20:56:05 +01:00
..
bin	ath79: add support for PISEN WMB001N	2019-08-08 21:00:59 +08:00
lzma-loader	ath79: lzma-loader: sync with ar71xx target	2018-06-06 22:25:53 +02:00
common-buffalo.mk	ath79: sort device definitions in image/*	2019-09-21 22:17:39 +02:00
common-netgear.mk	ath79: harmonize line breaks in image Makefiles	2019-12-20 00:29:05 +01:00
common-tp-link.mk	ath79: remove unused Build/mktplinkfw-combined	2020-01-08 16:17:58 +01:00
common-yuncore.mk	ath79: add support for YunCore TFTP image generation	2019-11-25 17:32:46 +01:00
generic-tp-link.mk	treewide: move mktplinkfw to tplink-v1-image in image-commands.mk	2020-01-08 16:15:29 +01:00
generic-ubnt.mk	ath79: add support for Ubiquiti EdgeSwitch/ToughSwitch 5XP	2020-01-14 09:38:32 +01:00
generic.mk	ath79: add support for D-Link DIR-505	2020-01-15 20:38:46 +01:00
Makefile	ath79: rename ATH_SOC to SOC	2019-12-20 01:12:42 +01:00
nand.mk	ath79: add support for Netgear WNDR4500 v3	2020-01-15 20:56:05 +01:00
tiny-netgear.mk	ath79: rename ATH_SOC to SOC	2019-12-20 01:12:42 +01:00
tiny-tp-link.mk	treewide: move mktplinkfw to tplink-v1-image in image-commands.mk	2020-01-08 16:15:29 +01:00
tiny.mk	ath79: Do not build dlink_dir-615-e4 by default	2019-12-23 15:24:43 +01:00