Christian Marangi 6d51c80424 airoha: an7581: enable USB node on eMMC RFB board ... Enable USB node on eMMC RFB board and disable USB2 3.0 port to make the 3rd PCIe line correctly work. This is needed to prevent the xHCI driver to mess with PCIe by configuring the USB2 3.0 port. Port will still be detected but won't be configureed by the driver and won't have PHY to configure for. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>		2025-10-28 13:19:24 +01:00
..
an7581	airoha: disable RTL8261N PHY driver	2025-10-19 23:16:06 +02:00
an7583	airoha: an7583: add NPU nodes and enable kernel config	2025-10-23 16:23:42 +02:00
dts	airoha: an7581: enable USB node on eMMC RFB board	2025-10-28 13:19:24 +01:00
en7523	airoha: net: fix building for en7523	2025-10-10 10:30:09 +02:00
image	airoha: an7581: add BL2 and BL31+U-Boot Artifacts for RFB board	2025-10-24 09:51:33 +02:00
patches-6.12	airoha: add pending patch for USB support on AN7581	2025-10-28 13:14:56 +01:00
Makefile	airoha: Introduce support for Airoha AN7583 SoC	2025-09-26 05:00:07 +02:00
modules.mk	airoha: rename subtarget from en7581 to an7581	2024-10-23 12:32:03 +02:00