openwrt/target/linux/ath79
Chuanhong Guo a9360452f0 ath79: add support for Qihoo C301
Specifications:
- SoC: AR9344
- RAM: 128MB
- Flash: 2 * 16MB (MX25L12845)
- Ethernet: 2 * FE LAN & 1 * FE WAN
- WiFi: 2.4G: AR9344 5G: QCA9882

Flash instruction:
1. Hold reset and power up the router
2. Set your IP to 192.168.1.x
3. Open 192.168.1.1 and upload the generated *factory* firmware

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-07-16 09:51:03 +08:00
..
base-files ath79: add support for Qihoo C301 2019-07-16 09:51:03 +08:00
dts ath79: add support for Qihoo C301 2019-07-16 09:51:03 +08:00
files ath79: ag71xx: defer probe if of_phy_connect failed 2019-06-05 10:12:31 +02:00
generic ath79: add support for jjPlus JA76PF2 2019-03-18 20:43:09 +01:00
image ath79: add support for Qihoo C301 2019-07-16 09:51:03 +08:00
nand treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.127 2019-06-18 14:47:53 +02:00
patches-4.19 kernel: bump 4.19 to 4.19.52 2019-06-18 14:47:53 +02:00
tiny treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
config-4.14 ath79: add support for D-Link DIR-859 A1 2018-12-30 20:08:13 +01:00
config-4.19 ath79: add support for Qihoo C301 2019-07-16 09:51:03 +08:00
Makefile treewide: kernel: bump some targets to 4.19 2019-06-18 16:08:55 +02:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00