openwrt/target/linux/ramips
INAGAKI Hiroshi a79f55e7e0 ramips: add support for ELECOM WRC-1750GS/GSV
ELECOM WRC-1750GS is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.

WRC-1750GSV has the same hardware with WRC-1750GS.

Specification:

- SoC		: MediaTek MT7621A
- RAM		: DDR3 128 MiB
- Flash		: SPI-NOR 16 MiB
- WLAN		: 2.4/5 GHz 3T3R (2x MediaTek MT7615)
- Ethernet	: 10/100/1000 Mbps x5
  - Switch	: MediaTek MT7530 (SoC)
- LED/keys	: 4x/6x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J4: 3.3V, GND, TX, RX from ethernet port side
  - 57600n8
- Power		: 12VDC, 1.5A

Flash instruction using factory image:

1. Boot WRC-1750GS (or WRC-1750GSV) normally
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
   for WRC-1750GS : wrc-1750gs-squashfs-factory.bin
   for WRC-1750GSV: wrc-1750gsv-squashfs-factory.bin
4. Wait ~120 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2020-07-16 13:39:44 +02:00
..
base-files/etc treewide: drop shebang from non-executable target files 2020-06-16 14:26:33 +02:00
dts ramips: add support for ELECOM WRC-1750GS/GSV 2020-07-16 13:39:44 +02:00
files/drivers ramips: fix sd polling 2020-06-27 00:19:13 +02:00
image ramips: add support for ELECOM WRC-1750GS/GSV 2020-07-16 13:39:44 +02:00
mt76x8 ramips: add support for Netgear R6020 2020-07-10 11:39:05 +02:00
mt7620 treewide: drop shebang from non-executable target files 2020-06-16 14:26:33 +02:00
mt7621 ramips: add support for D-Link DIR-878 A1 2020-07-13 22:45:04 +02:00
patches-4.14 kernel: Update kernel 4.14 to version 4.14.187 2020-07-04 21:12:42 +02:00
patches-5.4 ramips: kernel: fix awake-rt305x-dwc2 patch 2020-07-11 13:33:28 +02:00
rt288x ramips: remove default switch setup in 02_network 2020-05-19 19:03:02 +08:00
rt305x ramips: add support for ZyXEL Keenetic Lite Rev.B 2020-07-08 22:52:40 +02:00
rt3883 treewide: drop shebang from non-executable target files 2020-06-16 14:26:33 +02:00
Makefile ramips: add 5.4 as testing kernel 2020-04-12 22:27:18 +08:00
modules.mk ramips: fix path for dma-ralink and mtk-hsdma 2020-04-05 18:16:17 +08:00