Chukun Pan 9fa5b3afc9 ramips: add support for JCG Q20 ... JCG Q20 is an AX 1800M router. Hardware specs: SoC: MediaTek MT7621AT Flash: Winbond W29N01HV 128 MiB RAM: Winbond W632GU6NB-11 256 MiB WiFi: MT7915 2.4/5 GHz 2T2R Ethernet: 10/100/1000 Mbps x3 LED: Status (red / blue) Button: Reset, WPS Power: DC 12V,1A Flash instructions: Upload factory.bin in stock firmware's upgrade page, do not preserve settings. MAC addresses map: 0x00004 *:3e wlan2g/wlan5g 0x3fff4 *:3c lan/label 0x3fffa *:3c wan Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit 57cb387cfe)		2021-06-10 17:09:35 +02:00
..
lzma-loader	ramips: lzma-loader: make FLASH_START configurable	2020-09-03 14:15:30 +02:00
common-tp-link.mk	treewide: omit IMAGE_SIZE argument from check-size	2020-03-21 20:02:55 +01:00
Makefile	target: use SPDX license identifiers on Makefiles	2021-02-10 15:47:18 +01:00
mt76x8.mk	treewide: make AddDepends/usb-serial selective	2021-06-08 22:50:32 +02:00
mt7620.mk	treewide: make AddDepends/usb-serial selective	2021-06-08 22:50:32 +02:00
mt7621.mk	ramips: add support for JCG Q20	2021-06-10 17:09:35 +02:00
rt288x.mk	ramips: tidy up image subtarget Makefiles	2020-05-08 18:58:39 +02:00
rt305x.mk	treewide: make AddDepends/usb-serial selective	2021-06-08 22:50:32 +02:00
rt3883.mk	ramips: add support for Senao Engenius ESR600H	2020-12-22 19:11:50 +01:00