97256a28fe
EDUP EP-RT2960S has the similar hardware design as the SIMAX1800T. The main difference is the arrangement of the GPIO pins and the location of the MAC address. Specification ------------- - SoC : Mediatek MT7621 - RAM : 256 MiB DDR3 - Flash : 128 MiB NAND Flash - WLAN : Mediatek MT7905 DBDC - 2.4 GHz : 2x2 MIMO WiFi6 - 5 GHz : 2x2 MIMO WiFi6 - Ethernet : MT7621 built-in 10/100/1000 Mbps 1x WAN; 3x LAN - UART : 3.3V, 115200n8 - Buttons : 1x RESET; 1x WPS/MESH - LEDs : 1x Multi-Color(Blue;Green;Red) - Power : DC 12V1A - CMIIT ID : 2022AP7163 - TFTP IP : - server : 192.168.1.254 - router : 192.168.1.28 TFTP Installation(recommend) ------------ 1. Set local tftp server IP "192.168.1.254" and NetMask "255.255.255.0". 2. Rename initramfs-kernel.bin to "factory.bin" and put it in the root directory of the tftp server. tftpd64 is a good choice for Windows. 3. Remove all Ethernet cables and WiFi connections from the PC, except for the one connected to the EDUP EP-RT2960S. Start the TFTP server, plug in the power adapter and wait for the OpenWrt system to boot. 4. Backup "firmware" partition and rename it to "firmware.bin". We need it to back to the stock firmware. 5. Use "fw_printenv" command to list envs. If "firmware_select=2" is observed then set u-boot env variable via command: `fw_setenv firmware_select 1` 6. Apply sysupgrade.bin in OpenWrt LuCI. Web UI Installation ------------ 1. Apply update by uploading initramfs-factory.bin to the web UI. 2. Use "fw_printenv" command to list envs. If "firmware_select=2" is observed then set u-boot env variable via command: `fw_setenv firmware_select 1` 3. Apply squashfs-sysupgrade.bin in OpenWrt LuCI. Return to Stock Firmware ---------------------------- Restore the backup firmware partition in the installation step 4. MAC addresses ------------- +---------+-------------------+ | | MAC example | +---------+-------------------+ | LABEL | 24:D5:1C:xx:xx:xx | | LAN | 24:D5:1C:xx:xx:xx | | WAN | 24:D5:1C:xx:xx:xx | | WLAN2G | 24:D5:1C:xx:xx:xx | | WLAN5G | 26:D5:1C:xx:xx:xx | +---------+-------------------+ Tips: ----------- User can use `TFTP Installation` method to recover a brick device. Signed-off-by: Andrii Kuiukoff <andros.ua@gmail.com> Link: https://github.com/openwrt/openwrt/pull/20600 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .devcontainer/ci-env | ||
| .github | ||
| .vscode | ||
| config | ||
| include | ||
| LICENSES | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| COPYING | ||
| feeds.conf.default | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Download
Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.
If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.
An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:
Development
To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0