INAGAKI Hiroshi 927a77ecff ramips: add support for ELECOM WMC-M1267GST2 ... ELECOM WMC-M1267GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) mesh router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (Nanya NT5CC128M16JR-EK) - Flash : SPI-NOR 32 MiB (Winbond W25Q256JVFIQ) - WLAN : 2.4/5 GHz 2T2R (MediaTek MT7615D) - Ethernet : 10/100/1000 Mbps x5 - switch : MediaTek MT7530 (SoC) - LEDs/Keys : 6x/6x - UART : through-hole on PCB ("J4") - arrangement: 3.3V, GND, TX, RX from tri-angle marking - settings : 57600n8 - Power : 12 VDC, 1 A Flash instruction using factory image: 1. Boot WMC-M1267GST2 normally with "Router" mode 2. Access to "http://192.168.2.1/" and open firmware update page ("ファームウェア更新") 3. Select the OpenWrt factory image and click apply ("適用") button 4. Wait ~120 seconds to complete flashing MAC addresses: LAN : 04:AB:18:xx:xx:61 (Factory, 0xFFF4 (hex)) WAN : 04:AB:18:xx:xx:62 (Factory, 0xFFFA (hex)) 2.4 GHz: 04:AB:18:xx:xx:63 5 GHz : 04:AB:18:xx:xx:64 (Factory, 0x4 (hex)) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2024-05-11 19:33:28 +02:00
..
lzma-loader	ramips: lzma-loader: use default uart for rt305x	2024-01-02 22:10:34 +01:00
common-sercomm.mk	ramips: add support for Sercomm CPJ routers	2023-11-25 01:11:18 +01:00
common-tp-link.mk	ramips: add basic support for TP-Link EC330-G5u v1	2023-01-14 18:36:33 +01:00
Makefile	image: use helper function for size units	2023-11-26 18:37:20 +01:00
mt76x8.mk	ramips: add support for TP-Link RE205 v3	2024-03-23 23:38:33 +01:00
mt7620.mk	ramips: add support for Wavlink WL-WN531G3	2024-05-10 00:05:25 +02:00
mt7621.mk	ramips: add support for ELECOM WMC-M1267GST2	2024-05-11 19:33:28 +02:00
rt288x.mk	treewide: Disable building 32M RAM devices	2023-05-21 01:08:22 +02:00
rt305x.mk	treewide: Disable building 32M RAM devices	2023-05-21 01:08:22 +02:00
rt3883.mk	treewide: Disable building 32M RAM devices	2023-05-21 01:08:22 +02:00