mirror/openwrt
1
0
Fork 1
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2026-03-14 23:09:45 +01:00
Code Issues Projects Releases Packages Wiki Activity Actions 1
openwrt/target/linux/qualcommax/image/ipq50xx.mk
George Moussalem d7f9e240c2
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Details
Build all core packages / Build all core packages for selected target (push) Waiting to run
Details
qualcommax: ipq50xx: Add support for Xiaomi AX6000 
Add support for Xiaomi AX6000.

Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Etrontech EM6HE16EWAKG 512 MiB DDR3L-933
* Serial Port: 1v8 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax - up to 574 Mbps)
	 QCN9024 (4x4 5 Ghz 802.11an/ac/ax - up to 4804 Mbps)
 	 QCA9887 (1x1 5 Ghz 802.11ac/n - up to 433 Mbps)
* Ethernet: IPQ5018 integrated virtual switch connected to:
	- external QCA8337 switch   (3 LAN Ports 10/100/1000)
	- QCA8081 Phy WAN port  (10/100/1000/2500)
* Flash: Either of:
	- Gigadevice GD5F1GQ4RE9IGD (128 MiB)
	- ESMT F50D1G41LB (128 MiB)
* LEDs: 1x WLAN Link (GPIO 23 Active High)
	1x System Blue   (GPIO 24 Active High)
	1x System Yellow (GPIO 25 Active High)
	1x WAN Link Blue (GPIO 26 Active High)
	1x WAN Link Yellow   (GPIO 27 Active High)
	1x Green - Unused(GPIO 28 Active High)
	3x LAN Phy Green
	1x WAN Phy Green
* Buttons: 1x Reset  (GPIO 38 Active Low)

Known issue:
- QCA9887 doesn't come up (possibly due to 1-lane PCIe phy not coming up or missing method to drive power),
  hence the host PCIe controller is disabled in the DTS.

Flash instructions:

Download XMIR Patcher: https://github.com/openwrt-xiaomi/xmir-patcher

First flash a ubinized OpenWrt initramfs that will serve as the intermediate step, since
OpenWrt uses unified rootfs in order to fully utilize NAND and provide enough space for
packages, through either of the below two methods:

Installation via XMIR Patcher:

1. Load the initramfs image: openwrt-qualcommax-ipq50xx-xiaomi_ax6000-initramfs-factory.ubi

Installation via ubiformat method, through SSH:

1. If needed, enable SSH using XMIR Patcher.
2. Copy the file openwrt-qualcommax-ipq50xx-xiaomi_ax6000-initramfs-factory.ubi to the /tmp directory
3. Open an SSH shell to the router
4. Check which rootfs partition is your router booted in (0 = rootfs | 1 = rootfs_1):
nvram get flag_boot_rootfs
5. Find the rootfs and rootfs_1 mtd indexes respectively:
cat /proc/mtd
Please confirm if mtd18 and mtd19 are the correct indexes from above!
6. Use the command ubiformat to flash the opposite mtd with UBI image:
If nvram get flag_boot_rootfs returned 0:
ubiformat /dev/mtd19 -y -f /tmp/openwrt-qualcommax-ipq50xx-xiaomi_ax6000-initramfs-factory.ubi && nvram set flag_boot_rootfs=1 && nvram set flag_last_success=1 && nvram commit
otherwise:
ubiformat /dev/mtd18 -y -f /tmp/openwrt-qualcommax-ipq50xx-xiaomi_ax6000-initramfs-factory.ubi && nvram set flag_boot_rootfs=0 && nvram set flag_last_success=0 && nvram commit
7. Reboot the device by:
reboot

Continue in order to pernamently flash OpenWrt:
1. Upload the sysupgrade image to /tmp/ using SCP:
scp -O <path to image> root@192.168.1.1:/tmp/
2. Open an SSH shell to 192.168.1.1 from a PC within the same subnet
3. Use sysupgrade to flash the sysupgrade image:
sysupgrade -n -v /tmp/openwrt-qualcommax-ipq50xx-xiaomi_ax6000-squashfs-sysupgrade.bin

Device will reboot with OpenWrt, and then sysupgrade can be used to upgrade the device when desired.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19004
Signed-off-by: Robert Marko <robimarko@gmail.com>
2025-06-13 12:02:39 +02:00

152 lines
4.1 KiB
Makefile
Raw Blame History

DEVICE_VARS += BOOT_SCRIPT
define Build/mstc-header
$(eval version=$(word 1,$(1)))
$(eval hdrlen=$(if $(word 2,$(1)),$(word 2,$(1)),0x400))
gzip -c $@ | tail -c8 > $@.crclen
( \
printf "CMOC"; \
tail -c+5 $@.crclen; head -c4 $@.crclen; \
printf '$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' | \
dd bs=64 count=1 conv=sync 2>/dev/null; \
printf "$(version)" | \
dd bs=64 count=1 conv=sync 2>/dev/null; \
dd if=/dev/zero bs=$$(($(hdrlen) - 0x8c)) count=1 2>/dev/null; \
cat $@; \
) > $@.new
mv $@.new $@
rm -f $@.crclen
endef
define Device/elecom_wrc-x3000gs2
$(call Device/FitImageLzma)
DEVICE_VENDOR := ELECOM
DEVICE_MODEL := WRC-X3000GS2
DEVICE_DTS_CONFIG := config@mp03.3
SOC := ipq5018
KERNEL_IN_UBI := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 52480k
NAND_SIZE := 128m
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand | \
mstc-header 4.04(XZF.0)b90 | elecom-product-header WRC-X3000GS2
DEVICE_PACKAGES := ath11k-firmware-qcn6122 ipq-wifi-elecom_wrc-x3000gs2
endef
TARGET_DEVICES += elecom_wrc-x3000gs2
define Device/glinet_gl-b3000
$(call Device/FitImage)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-B3000
SOC := ipq5018
KERNEL_IN_UBI := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
NAND_SIZE := 128m
DEVICE_DTS_CONFIG := config@mp03.5-c1
SUPPORTED_DEVICES += b3000
BOOT_SCRIPT:= glinet_gl-b3000.bootscript
IMAGES := factory.img sysupgrade.bin
IMAGE/factory.img := append-ubi | gl-qsdk-factory | append-metadata
DEVICE_PACKAGES := \
ath11k-firmware-qcn6122 \
ipq-wifi-glinet_gl-b3000 \
dumpimage
endef
TARGET_DEVICES += glinet_gl-b3000
define Device/iodata_wn-dax3000gr
$(call Device/FitImageLzma)
DEVICE_VENDOR := I-O DATA
DEVICE_MODEL := WN-DAX3000GR
DEVICE_DTS_CONFIG := config@mp03.3
SOC := ipq5018
KERNEL_IN_UBI := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 52480k
NAND_SIZE := 128m
IMAGES += factory.bin
IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand | \
mstc-header 4.04(XZH.1)b90 0x480
DEVICE_PACKAGES := ath11k-firmware-qcn6122 ipq-wifi-iodata_wn-dax3000gr
endef
TARGET_DEVICES += iodata_wn-dax3000gr
define Device/linksys_ipq50xx_mx_base
$(call Device/FitImageLzma)
DEVICE_VENDOR := Linksys
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 8192k
IMAGE_SIZE := 83968k
NAND_SIZE := 256m
SOC := ipq5018
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=$$$$(DEVICE_MODEL)
endef
define Device/linksys_mr5500
$(call Device/linksys_ipq50xx_mx_base)
DEVICE_MODEL := MR5500
DEVICE_DTS_CONFIG := config@mp03.1
DEVICE_PACKAGES := kmod-ath11k-pci \
ath11k-firmware-qcn9074 \
ipq-wifi-linksys_mr5500 \
kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_mr5500
define Device/linksys_mx2000
$(call Device/linksys_ipq50xx_mx_base)
DEVICE_MODEL := MX2000
DEVICE_DTS_CONFIG := config@mp03.5-c1
DEVICE_PACKAGES := ath11k-firmware-qcn6122 \
ipq-wifi-linksys_mx2000
endef
TARGET_DEVICES += linksys_mx2000
define Device/linksys_mx5500
$(call Device/linksys_ipq50xx_mx_base)
DEVICE_MODEL := MX5500
DEVICE_DTS_CONFIG := config@mp03.1
DEVICE_PACKAGES := kmod-ath11k-pci \
ath11k-firmware-qcn9074 \
ipq-wifi-linksys_mx5500
endef
TARGET_DEVICES += linksys_mx5500
define Device/linksys_spnmx56
$(call Device/linksys_ipq50xx_mx_base)
DEVICE_MODEL := SPNMX56
DEVICE_DTS_CONFIG := config@mp03.1
DEVICE_PACKAGES := kmod-ath11k-pci \
ath11k-firmware-qcn9074 \
ipq-wifi-linksys_spnmx56
endef
TARGET_DEVICES += linksys_spnmx56
define Device/xiaomi_ax6000
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := AX6000
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@mp03.1
SOC := ipq5018
KERNEL_SIZE := 36864k
NAND_SIZE := 128m
DEVICE_PACKAGES := kmod-ath11k-pci \
ath11k-firmware-qcn9074 \
kmod-ath10k-ct-smallbuffers \
ath10k-firmware-qca9887-ct \
ipq-wifi-xiaomi_ax6000
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
ARTIFACTS := initramfs-factory.ubi
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
endif
endef
TARGET_DEVICES += xiaomi_ax6000
Reference in a new issue View git blame Copy permalink