Tobias Welz d40ce8b32d ramips: correct WizFi630S pin mappings ... WizFi630S had some pins changed in the release version of the board. The run led, wps button and a slide switch where affected. This patch is correcting this. i2c is removed as it is sharing a pin with the run (system) led. uart2 is enabled as it is also enabled in the OEM firmware. Signed-off-by: Tobias Welz <tw@wiznet.eu> (backported from commit d0b229f553) Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2020-08-08 16:36:32 +02:00
..
base-files	ramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5	2020-01-30 22:15:55 +01:00
dts	ramips: correct WizFi630S pin mappings	2020-08-08 16:36:32 +02:00
files-4.14/drivers	ramips: gsw_mt7621: disable PORT 5 MAC RX/TX flow control by default	2020-05-26 10:07:05 +01:00
image	ramips: enable flashing WizFi630S via OEM firmware	2020-08-08 16:36:24 +02:00
mt76x8	ramips: refresh all subtargets kernel configs	2019-11-24 17:49:35 +01:00
mt7620	ramips: refresh all subtargets kernel configs	2019-11-24 17:49:35 +01:00
mt7621	ramips: add support for ALFA Network Quad-E4G	2019-11-24 21:47:25 +01:00
patches-4.14	ramips: remove patches for USB-dwc2	2020-08-02 13:40:07 +02:00
rt288x	ramips: refresh all subtargets kernel configs	2019-11-24 17:49:35 +01:00
rt305x	ramips: refresh all subtargets kernel configs	2019-11-24 17:49:35 +01:00
rt3883	ramips: refresh all subtargets kernel configs	2019-11-24 17:49:35 +01:00
Makefile	ramips: switch to linux 4.14	2018-04-06 18:07:43 +02:00
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00