mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-02-03 12:57:42 +01:00
73e04e2464
- SoC : MediaTek MT7622A, dual-core 1.35 Ghz ARM Cortex-A53 CPU
- RAM : DDR3 512 MiB (Nanya NT5CC256M16ER-EKI)
- Flash : SPI-NAND 128 MiB (Winbond W25N01GVZEIG)
- Ethernet : 5 port Switch
- LAN :
4x 10/100/1000 Mbps RJ-45 Port
- WAN :
1x 10/100/1000 Mbps RJ-45 Port
- LED : 10x LEDs
1x Power (Blue, GPIO)
1x WiFi (Green, GPIO)
2x MiniPCIe (Orange)
1x M.2 B Key (Red)
5x Ethernet activity (White)
- UART : 1x4 pin header on PCB [J19]
- arrangement : 3.3V, TX, RX, GND
- settings : 115200, 8n1
- Button : 2x (Reset, WPS)
- GPS : 1x (Quectel L76-L)
- WiFi : 2x
WiFi 4 (MediaTek MT7622A)
WiFI HaLow (AsiaRF MM610X-001)
- BT : BT 4.2/BLE 5.0 (MediaTek MT7622A)
- Socket :
2x MiniPCIe (PCIe Gen2 + USB 2.0) with extra SPI interface (NI)
1x M.2 B key (USB 3.0)
1x SIM Card
1x USB-A (USB 2.0)
- Power : 12V DC, 1A
MAC addresses :
WLAN: 00:0A:52:xx:xx:xx (Factory, 0x6)
LAN: 00:0A:52:xx:xx:xx (Factory, 0x7fff4)
WAN: 00:0A:52:xx:xx:xx (Factory, 0x7fffa)
Note: To use SPI interface on mPCIe slot, weld 4x 0402 0R resistors on [R832-835] or [R960-963]
mPCIe mapping:
45# - SPI_CLK
47# - SPI_MISO
49# - SPI_MOSI
51# - SPI_CSN
Flash instruction through LuCI:
This device is flashed OpenWRT base firmware with this target.
The LuCI webpage is integrated in default for upgrading.
Flash instruction through u-boot:
1. Prepare the TFTP server on PC.
2. Connect uart to PC, select "2. System Load Linux Kernel then write to Flash via TFTP." in u-boot menu.
3. input flashed bin file path, server IP, client IP
4. Wait about 20 seconds to complete flashing
Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19962
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
||
|---|---|---|
| .. | ||
| imagebuilder | ||
| linux | ||
| llvm-bpf | ||
| sdk | ||
| toolchain | ||
| Config.in | ||
| Makefile | ||