mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2026-03-04 08:24:15 +01:00
e1a55de7a7
The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with
two external antennas. It comes with a coaxial HomePNA port.
Hardware:
- SoC: Broadcom BCM6368
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 64 MB DDR
- Flash: 32 MB parallel NOR
- LAN switch: Broadcom BCM53115, 5x 1Gbit
- LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213
- Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
- USB: 1x 2.0
- Buttons: 2x, 1 reset
- LEDs: 7x
- UART: yes
The HPNA hardware probably needs a firmware to make the coaxial port work.
In the OEM firmware, it's apparently sent with an utility (inhpna) through
the ethernet port.
Installation via CFE web UI:
1. Connect the UART serial port.
2. Power on the router and press enter at the console prompt to stop the
bootloader.
4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware
5. Wait a few minutes for it to finish
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
|
||
|---|---|---|
| .. | ||
| bcm6318-comtrend-ar-5315u.dts | ||
| bcm6318.dtsi | ||
| bcm6328-comtrend-ar-5381u.dts | ||
| bcm6328-comtrend-ar-5387un.dts | ||
| bcm6328.dtsi | ||
| bcm6358-huawei-hg556a-b.dts | ||
| bcm6358.dtsi | ||
| bcm6362-huawei-hg253s-v2.dts | ||
| bcm6362-netgear-dgnd3700-v2.dts | ||
| bcm6362.dtsi | ||
| bcm6368-actiontec-r1000h.dts | ||
| bcm6368-comtrend-vr-3025u.dts | ||
| bcm6368-comtrend-vr-3025un.dts | ||
| bcm6368-netgear-dgnd3700-v1.dts | ||
| bcm6368-netgear-dgnd3700.dtsi | ||
| bcm6368-netgear-dgnd3800b.dts | ||
| bcm6368-observa-vh4032n.dts | ||
| bcm6368.dtsi | ||
| bcm6369-comtrend-wap-5813n.dts | ||
| bcm6369-netgear-evg2000.dts | ||
| bcm63167-sercomm-h500-s-lowi.dts | ||
| bcm63167-sercomm-h500-s-vfes.dts | ||
| bcm63167-sercomm-h500-s.dtsi | ||
| bcm63168-comtrend-vr-3032u.dts | ||
| bcm63168-sercomm-shg2500.dts | ||
| bcm63268.dtsi | ||