Michal Cieslakiewicz 69df7eb73d ath79: add LAN LEDs control bits for AR724x GPIO function pinmux ... Currently AR724x pinmux for register 0x18040028 controls only JTAG disable bit. This patch adds new DTS settings to control LAN LEDs and CLKs that allow full software control over these diodes - exactly the same is done by ar71xx target in device setup phase for many routers (WNR2000v3 for example). 'switch_led_disable_pins' clears AR724X_GPIO_FUNC_ETH_SWITCH_LED[0-4]_EN bits. 'clks_disable_pins' clears AR724X_GPIO_FUNC_CLK_OBS[1-5]_EN and AR724X_GPIO_FUNC_GE0_MII_CLK_EN bits. These all should be used together, along with 'jtag_disable_pins', to allow OS to control all GPIO-connected LEDs and buttons on device. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>		2019-10-21 13:14:52 +02:00
..
base-files	ath79: add support for Sitecom WLR-7100	2019-10-21 13:01:10 +02:00
dts	ath79: add LAN LEDs control bits for AR724x GPIO function pinmux	2019-10-21 13:14:52 +02:00
files	ath79: add AR934x NAND Flash Controller driver	2019-10-20 15:32:53 +02:00
generic	ath79: widen RedBoot directory search and add PHY	2019-07-17 22:59:29 +02:00
image	ath79: add support for Sitecom WLR-7100	2019-10-21 13:01:10 +02:00
nand	ath79: add AR934x NAND Flash Controller driver	2019-10-20 15:32:53 +02:00
patches-4.14	kernel: bump 4.14 to 4.14.147	2019-10-08 12:44:35 +02:00
patches-4.19	ath79: add AR934x NAND Flash Controller driver	2019-10-20 15:32:53 +02:00
tiny	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00
config-4.14	ath79: add support for D-Link DIR-859 A1	2018-12-30 20:08:13 +01:00
config-4.19	ath79: add support for Qihoo C301	2019-07-16 09:51:03 +08:00
Makefile	treewide: kernel: bump some targets to 4.19	2019-06-18 16:08:55 +02:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00