openwrt/target
Qing W 6960d03f11
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
mediatek: Add support for Acer Predator Connect W6x Ubootmod
Product name: Acer Predator Connect W6x
Product link: https://www.acer.com/us-en/predator/networking/wi-fi/predator-connect-w6x/pdp/FF.G2TTA.001

* Specifications:

SOC: MT7986AV
RAM: 1024MB
Flash: 256 MB SPI NAND
Ports: 4 LAN (1G) & 1 WAN (2.5G)
WIFI: MT7976GN + MT7976AN
LED: 1, ws2812b controller

** This commit includes a fix for the GPIO pins for factory/reset and WPS. It was reversed and is now fixed.

* U-Boot Mod Openwrt Installation via UART:

Openwrt Stock Layout Commit: 6e04dccb7a
NOTE: Stock Openwrt is not necessary. You can go straight to ubootmod version of the firmware. However, it is recommended to follow stock layout instructions to backup NAND.

1. Configure TFTP server with IP 192.168.1.66. Copy `openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb` to TFTP root and rename to `predator.bin`
2. Interrupt boot by pressing 0 on startup or select `U-Boot Console` in U-Boot Boot Menu.
3. Run setenv `serverip 192.168.1.66; setenv ipaddr 192.168.1.1; tftpboot 0x46000000 predator.bin; bootm` in uboot console.
4. Wait for boot complete on Openwrt initramfs env.
5. Transfer `openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb`,
		`openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-squashfs-sysupgrade.itb`,
		`openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-bl31-uboot.fip`,
		`openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-preloader.bin` to router's /tmp/ directory.
6. run `ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5`
7. run `ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB`
8. run `ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB`
9. run `ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB`
10. run `ubiupdatevol /dev/ubi0_2 /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-initramfs-recovery.itb`
11. install kmod-mtd-rw via opkg or apk.
12. run `insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1`
13. run `mtd write /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-preloader.bin bl2`
14. run `mtd write /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-bl31-uboot.fip fip`
15. run `sysupgrade -n /tmp/openwrt-mediatek-filogic-acer_predator-w6x-ubootmod-squashfs-sysupgrade.itb`
16. reboot to ubootmod layout

MTD layout before ubootmod:
```
dev:    size   erasesize  name
mtd0: 00100000 00020000 "bl2"
mtd1: 00080000 00020000 "u-boot-env"
mtd2: 00200000 00020000 "factory"
mtd3: 00200000 00020000 "fip"
mtd4: 00020000 00020000 "prod"
mtd5: 00100000 00020000 "dual"
mtd6: 00100000 00020000 "pot"
mtd7: 06400000 00020000 "ubi"
mtd8: 06400000 00020000 "ubi1"
mtd9: 00800000 00020000 "storage"
```

MTD layout after ubootmod:
```
dev:    size   erasesize  name
mtd0: 00100000 00020000 "bl2"
mtd1: 00080000 00020000 "u-boot-env"
mtd2: 00200000 00020000 "factory"
mtd3: 00200000 00020000 "fip"
mtd4: 00020000 00020000 "prod"
mtd5: 0d200000 00020000 "ubi"
```

Signed-off-by: Qing W <ses1er@gmail.com>
2025-10-31 09:40:07 +00:00
..
imagebuilder imagebuilder: implement STRIP_ABI option for manifest target 2025-07-03 12:45:59 +02:00
linux mediatek: Add support for Acer Predator Connect W6x Ubootmod 2025-10-31 09:40:07 +00:00
llvm-bpf build: use zstd for IB, toolchain, SDK and LLVM compression 2024-04-13 08:05:04 +02:00
sdk Revert "sdk: use git-src-full to allow Git versioning" 2025-10-29 21:09:57 +01:00
toolchain build: use zstd for IB, toolchain, SDK and LLVM compression 2024-04-13 08:05:04 +02:00
Config.in targets: add USES_PM auto-feature 2025-07-20 12:16:13 +01:00
Makefile build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies 2024-03-03 23:13:59 +01:00