Luis Mita 8fb644e9e8 ramips: mt7621: add support for Cudy AP1300 Outdoor v1 ... Hardware: - SoC: MediaTek MT7621DAT - Flash: 16 MiB XM25QH128C - RAM: 128 MiB - WLAN: 2.4 GHz (MT7603E, 11n), 5 GHz (MediaTek MT7613BEN, 11ac) - Ethernet: 1x10/100/1000 Mbps LAN - Buttons: 1 Reset button, 1 WPS button - LEDs: 5x Green - Serial Console: unpopulated header 115200 8n1 (silkscreen on PCB) - Power: POE 802.3af (37-57V DC) MAC addresses: +---------+-------------------+-----------+ | | MAC | Algorithm | +---------+-------------------+-----------+ | LAN | 80:af:ca:xx:xx:x0 | label | | WLAN 2g | 80:af:ca:xx:xx:x0 | label | | WLAN 5g | 82:af:ca:xx:xx:x1 | +1 | +---------+-------------------+-----------+ Installation: The factory firmware is locked: you can only work with Cudy signed firmware. Download a intermediate firmware signed by Cudy here: https://www.cudy.com/blogs/faq/openwrt-software-download After that, login to the router (192.168.10.254, password "admin") and install the intermediate firmware. If you can reach LuCI or SSH now on the intermediate firmware, just use the sysupgrade image with the 'Keep settings' option turned off. Special thanks to Daniel de Kock for starting the porting work at #16265. Signed-off-by: Luis Mita <luis@luismita.com> Co-Authored-By: Daniel de Kock <daniel@riot.network> Co-Authored-By: Hauke Mehrtens <hauke@hauke-m.de> Link: https://github.com/openwrt/openwrt/pull/20268 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2025-11-09 18:00:18 +01:00
..
etc	ramips: mt7621: add support for Cudy AP1300 Outdoor v1	2025-11-09 18:00:18 +01:00
lib	ramips: mt7621: add support for D-Link DIR-X1860 B1 / DIR-X1550 A1	2025-10-19 23:54:56 +02:00
sbin