Kyoungkyu Park 6041c693dd ramips: add support for HUMAX E2 ... HUMAX E2 (also known as HUMAX QUANTUM E2) is a 2.4/5GHz band AC router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 8MB (MXIC MX25L6405D) - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610E - Ethernet: 1x 10/100Mbps - Switch: SoC internal - UART: J2 (57600 8N1) - pinout: [3V3] (RXD) (GND) (TXD) Installation and Recovery via TFTP: 1. Connect ethernet cable between Router port and PC Ethernet port. 2. Set your computer to a static IP **192.168.1.1** 3. Turn the device off and wait a few seconds. Hold the WPS button on front of device and insert power. 4. Send a firmware image to **192.168.1.6** using TFTP. You can use any TFTP client. (tftp, curl, Tftpd64...) 5. Wait until Power LED stop flashing. **DO NOT TURN OFF DEVICE!** The device will be automatically rebooted. Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space>		2022-01-15 20:05:46 +09:00
..
base-files/etc	ramips: remove model name from LED labels	2020-10-02 14:51:57 +02:00
dts	ramips: add support for HUMAX E2	2022-01-15 20:05:46 +09:00
files/drivers	ramips: aw9523: add can_sleep flag for GPIO chip	2021-12-29 03:43:03 +01:00
image	ramips: add support for HUMAX E2	2022-01-15 20:05:46 +09:00
mt76x8	ramips: add support for Joowin WR758AC V1 and V2	2022-01-08 00:49:59 +01:00
mt7620	ramips: add support for HUMAX E2	2022-01-15 20:05:46 +09:00
mt7621	ramips: enable badblock table support on linksys ea7xxx devices	2022-01-13 18:33:06 +01:00
patches-5.10	ramips: mt7621_nand: fix writing upper half of fdm data	2022-01-13 18:33:06 +01:00
rt288x	kernel: filter out both Clang and LLD versions	2021-12-17 16:16:34 +01:00
rt305x	kernel: filter out both Clang and LLD versions	2021-12-17 16:16:34 +01:00
rt3883	kernel: filter out both Clang and LLD versions	2021-12-17 16:16:34 +01:00
Makefile	ramips: switch to kernel 5.10	2021-12-13 19:36:52 +01:00
modules.mk	ramips: rename mtk-hsdma to hsdma-mt7621	2021-03-04 23:43:02 -10:00